أين هو فين?
•
لا يوجد رقم تعريف؟
احصل على تقارير إبيكفين
CERTAIN VEHICLES WERE EQUIPPED WITH FRONT BRAKE HOSE ASSEMBLIES THAT WERE INCORRECTLY MANUFACTURED BY THE SUPPLIER. THESE ASSEMBLIES, BOTH RH AND LH, WERE INCORRECTLY BUILT WITH THE FITTINGS MISORIENTED BY 90 DEGREES. THIS COULD CAUSE CHAFING OF THE BRAKE HOSE THROUGH CONTACT WITH THE ADJACENT TIRE DURING FULL TURNS. CONTINUED CHAFING COULD RESULT IN A BRAKE FLUID LEAK.
CERTAIN VEHICLES WERE EQUIPPED WITH FRONT BRAKE HOSE ASSEMBLIES THAT WERE INCORRECTLY MANUFACTURED BY THE SUPPLIER. THESE ASSEMBLIES, BOTH RH AND LH, WERE INCORRECTLY BUILT WITH THE FITTINGS MISORIENTED BY 90 DEGREES. THIS COULD CAUSE CHAFING OF THE BRAKE HOSE THROUGH CONTACT WITH THE ADJACENT TIRE DURING FULL TURNS. CONTINUED CHAFING COULD RESULT IN A BRAKE FLUID LEAK.
CERTAIN VEHICLES MAY HAVE BEEN ASSEMBLED WITHOUT THE SPECIFIED EXHAUST SYSTEM HEAT SHIELDS. THE ABSENCE OF THESE SHIELDS COULD CAUSE HIGH FLOOR PAN TEMPERATURES AND SMOLDERING OF THE FLOOR COVERINGS UNDER CERTAIN DRIVING OR ENGINE MALFUNCTION CONDITIONS.
ON CERTAIN VEHICLES, THE PINCH BOLT AND NUT USED TO ATTACH THE INTERMEDIATE STEERIING SHAFT TO THE STEERING COLUMN WERE OMITTED DURING ASSEMBLY. THIS COULD RESULT IN SEPARATION OF THE STEERING SHAFT FROM THE STEERING COLUMN.
CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
COOLING FAN BLADES MAY CRACK AND SEPARATE BECAUSE THEY CANNOT WITHSTAND STRESS FROM VIBRATIONS THAT OCCUR DURING NORMAL ENGINE OPERATION.
THE OPTIONAL TANDEM SUSPENSION ASSEMBLY MAY HAVE BEEN INSTALLED USING A STANDARD BEAM END ADAPTER KIT, RATHER THAN THE REQUIRED SPECIAL KIT. PROGRESSIVE DETERIORATION COULD OCCUR TO THE ADAPTER TO BEAM END BUSHING JOINT, POSSIBLY RESULTING IN FRACTURE OF THE BEAM TO AXLE ATTACHING BOLTS.
CRACKS MAY DEVELOP IN THE SPIDER MEMBER OF SEVEN BLADE FANS DUE TO VIBRATIONS OF GREATER SEVERITY THAN ANTICIPATED. THE CRACKS MAY PROGRESS TO THE POINT OF FRACTURE AND ALLOW PORTIONS OF THE SPIDER ARMS AND ATTACHED BLADES TO SEPARATE.
COOLING FAN BLADES MAY CRACK AND SEPARATE BECAUSE THEY CANNOT WITHSTAND STRESS FROM VIBRATIONS THAT OCCUR DURING NORMAL ENGINE OPERATION.
THE OPTIONAL TANDEM SUSPENSION ASSEMBLY MAY HAVE BEEN INSTALLED USING A STANDARD BEAM END ADAPTER KIT, RATHER THAN THE REQUIRED SPECIAL KIT. PROGRESSIVE DETERIORATION COULD OCCUR TO THE ADAPTER TO BEAM END BUSHING JOINT, POSSIBLY RESULTING IN FRACTURE OF THE BEAM TO AXLE ATTACHING BOLTS.
اكتشف نصائح الخبراء والنصائح والأخبار حول شراء المركبات المستعملة وصيانتها.
سنخبرك هنا بكيفية جعل قيادة السيارة القديمة أكثر أمانًا.
اقرأ أكثر
سيخبرك فريقنا بشأن وضع ميزانية لمدفوعات السيارات الجديدة
اقرأ أكثر
تحقق من مقالتنا واكتشف ما يمكن أن يخبرك به رمز VIN الخاص بشركة فولفو.
اقرأ أكثر
