أين هو فين?
•
لا يوجد رقم تعريف؟
احصل على تقارير إبيكفين
CRACKS MAY DEVELOP IN THE SPIDER MEMBER OF SEVEN BLADE FANS DUE TO VIBRATIONS OF GREATER SEVERITY THAN ANTICIPATED. THE CRACKS MAY PROGRESS TO THE POINT OF FRACTURE AND ALLOW PORTIONS OF THE SPIDER ARMS AND ATTACHED BLADES TO SEPARATE.
THE OPTIONAL TANDEM SUSPENSION ASSEMBLY MAY HAVE BEEN INSTALLED USING A STANDARD BEAM END ADAPTER KIT, RATHER THAN THE REQUIRED SPECIAL KIT. PROGRESSIVE DETERIORATION COULD OCCUR TO THE ADAPTER TO BEAM END BUSHING JOINT, POSSIBLY RESULTING IN FRACTURE OF THE BEAM TO AXLE ATTACHING BOLTS.
THE INVOLVED CHASSIS CABS WERE IMPROPERLY EQUIPPED WITH OUTSIDE REARVIEW MIRRORS WITH A REFLECTIVE SURFACE AREA OF TWENTY SQUARE INCHES, WHICH DOES NOT COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 111, "REARVIEW MIRRORS". THIS REQUIRES VEHICLES WITH A GVWR OF MORE THAT 10,000 LBS. TO BE EQUIPPED WITH OUTSIDE REARVIEW MIRRORS OF NOT LESS THAN FIFTY SQUARE INCHES OF REFLECTIVE SURFACE AREA.
CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
COOLING FAN BLADES MAY CRACK AND SEPARATE BECAUSE THEY CANNOT WITHSTAND STRESS FROM VIBRATIONS THAT OCCUR DURING NORMAL ENGINE OPERATION.
CRACKS MAY DEVELOP IN THE SPIDER MEMBER OF SEVEN BLADE FANS DUE TO VIBRATIONS OF GREATER SEVERITY THAN ANTICIPATED. THE CRACKS MAY PROGRESS TO THE POINT OF FRACTURE AND ALLOW PORTIONS OF THE SPIDER ARMS AND ATTACHED BLADES TO SEPARATE.
THE OPTIONAL TANDEM SUSPENSION ASSEMBLY MAY HAVE BEEN INSTALLED USING A STANDARD BEAM END ADAPTER KIT, RATHER THAN THE REQUIRED SPECIAL KIT. PROGRESSIVE DETERIORATION COULD OCCUR TO THE ADAPTER TO BEAM END BUSHING JOINT, POSSIBLY RESULTING IN FRACTURE OF THE BEAM TO AXLE ATTACHING BOLTS.
THE INVOLVED VEHICLES DO NOT HAVE A PROTECTIVE FUEL TANK SHIELD. AS A RESULT THE 137 INCH AND 161 INCH WHEELBASE CHASSIS CABS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY". IF THE ABOVE VEHICLES UNDERGO FRONTAL IMPACT, THE DRIVE SHAFT FRONT UNIVERSAL JOINT MAY COME INTO CONTACT WITH THE FUEL TANK, RESULTING IN FUEL SPILLAGE.
THE INVOLVED VEHICLES WERE MANUFACTURED WITHOUT THE MIDSHIP FUEL TANK PROTECTIVE SHIELDS. AS A RESULT, THEY DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY", DUE TO EXCESSIVE FUEL SPILLAGE UPON FRONTAL IMPACT.
THE INVOLVED VEHICLES WERE MANUFACTURED WITHOUT THE MIDSHIP FUEL TANK PROTECTIVE SHIELDS. AS A RESULT, THEY DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 301, "FUEL SYSTEM INTEGRITY", DUE TO EXCESSIVE FUEL SPILLAGE UPON FRONTAL IMPACT.
اكتشف نصائح الخبراء والنصائح والأخبار حول شراء المركبات المستعملة وصيانتها.
دليل توضيحي وشامل لأفضل الخيارات المتوفرة في السوق لسيارات اس يو في ذات الكفاء...
اقرأ أكثر
اقرأ هذه المقالة لاكتشاف الكثير من المعلومات حول أرقام Ford VIN
اقرأ أكثر
سنخبرك هنا بكل شيء عن السيارات المستعملة المعتمدة.
اقرأ أكثر
