2003 MAZDA TRIBUTE Recall Check

الاستدعاء#:

04V175000

تاريخ الاستدعاء:

2004-04-14

المكون (المكونات):

POWER TRAIN: AUTOMATIC TRANSMISSION: CONTROL MODULE (TCM/PCM/TECM)

ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH 3.0L V6 DURATEC ENGINES , DURING DECELERATION, THE ENGINE CAN STALL.

الاستدعاء#:

04V583000

تاريخ الاستدعاء:

2004-12-10

المكون (المكونات):

VEHICLE SPEED CONTROL: CABLES

ON CERTAIN SPORT UTILITY VEHICLES, THE ACCELERATOR CABLE MAY PREVENT THE THROTTLE FROM RETURNING TO THE IDLE POSITION.

الاستدعاء#:

04V605000

تاريخ الاستدعاء:

2004-12-23

المكون (المكونات):

LATCHES/LOCKS/LINKAGES: HATCHBACK/LIFTGATE: LOCK

CERTAIN 2004-2005 SPORT UTILITY VEHICLES AND CERTAIN 2001-2003 SPORT UTILITY VEHICLE HAVING REAR LIFTGATE COMPONENTS SERVICED WITH 2004 EQUIVALENT COMPONENTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, 'DOOR LOCKS AND DOOR RETENTION COMPONENTS.' THE REAR LIFTGATE LATCHING SYSTEM DOES NOT MEET THE INERTIA LOAD REQUIREMENT IN ONE DIRECTION.

الاستدعاء#:

07E023000

تاريخ الاستدعاء:

2007-03-29

المكون (المكونات):

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: MASTER CYLINDER

CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.

الاستدعاء#:

07V157000

تاريخ الاستدعاء:

2007-04-11

المكون (المكونات):

SERVICE BRAKES, HYDRAULIC: ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP: CONTROL UNIT/MODULE

ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH ANTILOCK BRAKES (ABS), THE ABS MODULE CONNECTOR MAY HAVE MISSING OR DISLODGED WIRE SEALS. THIS CONDITION COULD ALLOW CONTAMINATION TO ENTER THE MODULE CONNECTOR, CREATING A POTENTIAL FOR AN ELECTRICAL SHORT.

الاستدعاء#:

12V357000

تاريخ الاستدعاء:

2012-07-27

المكون (المكونات):

ENGINE AND ENGINE COOLING

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

الاستدعاء#:

12V357000

تاريخ الاستدعاء:

2012-07-27

المكون (المكونات):

VEHICLE SPEED CONTROL: CABLES

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

الاستدعاء#:

14V174000

تاريخ الاستدعاء:

2014-04-10

المكون (المكونات):

STRUCTURE: FRAME AND MEMBERS

Mazda North American Operations (Mazda) is recalling certain model year 2001-2004 Tribute vehicles manufactured May 22, 2000, through December 19, 2003, originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin and the District of Columbia. These vehicles may experience excessive corrosion at the forward attachment of the lower control arm.

الاستدعاء#:

15E045000

تاريخ الاستدعاء:

2015-06-03

المكون (المكونات):

SUSPENSION: FRONT: WHEEL BEARING

The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.