AUDI Recall Check

Número de llamada a revisión:

97V172000

Fecha de retirada:

1997-10-10

Componentes:

AIR BAGS: FRONTAL: SENSOR/CONTROL MODULE-INACTIVE

VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME AIR BAG SENSORS DO NOT COMPLY WITH AUDI'S DURABILITY STANDARDS OVER THE LIFETIME OF THE VEHICLE.

Número de llamada a revisión:

93V006000

Fecha de retirada:

1993-01-29

Componentes:

POWER TRAIN: AXLE ASSEMBLY

THE DIFFERENTIAL OIL OF THE TRANSAXLE IS LOST OVER TIME DUE TO EVAPORATION. LOW OIL LEVELS CAUSE PREMATURE BEARING AND GEAR WEAR AND EVENTUAL FAILURE OF THE DIFFERENTIAL.

Número de llamada a revisión:

97V172000

Fecha de retirada:

1997-10-10

Componentes:

AIR BAGS: FRONTAL: SENSOR/CONTROL MODULE-INACTIVE

VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME AIR BAG SENSORS DO NOT COMPLY WITH AUDI'S DURABILITY STANDARDS OVER THE LIFETIME OF THE VEHICLE.

Número de llamada a revisión:

97V172000

Fecha de retirada:

1997-10-10

Componentes:

AIR BAGS: FRONTAL: SENSOR/CONTROL MODULE-INACTIVE

VEHICLE DESCRIPTION: PASSENGER VEHICLES. SOME AIR BAG SENSORS DO NOT COMPLY WITH AUDI'S DURABILITY STANDARDS OVER THE LIFETIME OF THE VEHICLE.

Número de llamada a revisión:

93V006000

Fecha de retirada:

1993-01-29

Componentes:

POWER TRAIN: AXLE ASSEMBLY

THE DIFFERENTIAL OIL OF THE TRANSAXLE IS LOST OVER TIME DUE TO EVAPORATION. LOW OIL LEVELS CAUSE PREMATURE BEARING AND GEAR WEAR AND EVENTUAL FAILURE OF THE DIFFERENTIAL.

Número de llamada a revisión:

96V084000

Fecha de retirada:

1996-05-13

Componentes:

VEHICLE SPEED CONTROL

A BUSHING WHICH GUIDES THE CRUISE CONTROL ROD CAN, OVER TIME, DETERIORATE AND CAUSE THE CONTROL ROD TO BIND.

Número de llamada a revisión:

90V069000

Fecha de retirada:

1990-04-13

Componentes:

SEATS: FRONT ASSEMBLY: RECLINER

A SECURING CLIP ON THE OUTSIDE OF HINGES OF THE LEFT AND RIGHT FRONT SEAT BACK MAY NOT BE PROPERLY SEATED DUE TO INTERFERENCE WITH SEAT COVERING MATERIAL.

Número de llamada a revisión:

89V006000

Fecha de retirada:

1989-01-23

Componentes:

FUEL SYSTEM, GASOLINE

FUEL INJECTION SEALS MAY HARDEN, DUE TO HIGH TEMPERATURE AND ALCOHOL IN SOME FUELS, AND ALLOW FUEL TO ESCAPE INTO THE ENGINE COMPARTMENT.

Número de llamada a revisión:

89V006000

Fecha de retirada:

1989-01-23

Componentes:

FUEL SYSTEM, GASOLINE

FUEL INJECTION SEALS MAY HARDEN, DUE TO HIGH TEMPERATURE AND ALCOHOL IN SOME FUELS, AND ALLOW FUEL TO ESCAPE INTO THE ENGINE COMPARTMENT.

Número de llamada a revisión:

91V050000

Fecha de retirada:

1991-04-11

Componentes:

EQUIPMENT: MECHANICAL: ACCESSORY SCISSOR/SCREW/BOTTLE JACK/LIFT

INSTRUCTION LABEL IN THE TRUNK OF VEHICLE IS INCORRECT FOR THE JACK SUPPLIED WITH THE VEHICLE.