2000 BMW X5 Recall Check

Número de llamada a revisión:

02V194000

Fecha de retirada:

2002-07-26

Componentes:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

ON CERTAIN PASSENGER VEHICLES, DUE TO A MANUFACTURING PROBLEM, THE BRAKE PEDAL ARM PIVOT SHAFT COULD LOOSEN FROM ITS SUPPORT BRACKET.

Número de llamada a revisión:

01V195000

Fecha de retirada:

2001-07-02

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES/PIPING, AND FITTINGS

VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. THERE IS A PLASTIC CARRIER TO WHICH THE OIL FILTER HOUSING IS ATTACHED. OIL SUPPLY AND RETURN LINES ARE ATTACHED TO THE FILTER HOUSING. OVER TIME, THIS CARRIER COULD SAG SLIGHTLY. IF THIS HAPPENS, ONE OF THE OIL LINES, WHICH ARE ARMORED WITH STEEL MESH, COULD COME INTO CONTACT AND CHAFE A STEEL BRAKE LINE LOCATED IMMEDIATELY UNDERNEATH.

Número de llamada a revisión:

01V196000

Fecha de retirada:

2001-07-02

Componentes:

POWER TRAIN: AUTOMATIC TRANSMISSION: PARK/NEUTRAL START INTERLOCK SWITCH

VEHICLE DESCRIPTION: 4.4I SPORT UTILITY VEHICLES. OVER AN EXTENDED PERIOD OF TIME, ABRASION PARTICLES COULD DEPOSIT ON THE ELECTRICAL CONTACTS WITHIN THE SWITCH, CAUSING A DISRUPTION OF THE ELECTRIC CURRENT THROUGH THE CONTACTS. IF THE DISRUPTION OCCURS WHEN THE VEHICLE IS STATIONARY WITH THE TRANSMISSION IN THE NEUTRAL OR PARK POSITIONS, THE TRANSMISSION WILL SWITCH AUTOMATICALLY INTO THE EMERGENCY PROGRAM, WHICH IS DISPLAYED IN THE INSTRUMENT CLUSTER VIA A WARNING LAMP AND A MESSAGE, "TRANS. FAIL-SAFE PROG." IN THIS CASE, THE VEHICLE CAN BE DRIVEN IN LOWER GEARS ONLY WITH LIMITED ENGINE OUTPUT.

Número de llamada a revisión:

00V010000

Fecha de retirada:

2000-02-02

Componentes:

STEERING: STEERING WHEEL/HANDLE BAR

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES. THE LOWER STEERING SHAFT COUPLING INCLUDES A PLASTIC COLLAR WHICH FITS OVER THE LOWER STEERING RACK INPUT SHAFT. THIS COLLAR IS PUSHED DOWN ONTO THE STEERING RACK AND TIGHTENED DURING ASSEMBLY. ON SOME OF THE AFFECTED VEHICLES, THE COLLAR MAY NOT HAVE BEEN PUSHED DOWN FULLY ONTO THE RACK AT THE ASSEMBLY PLANT.

Número de llamada a revisión:

03V001000

Fecha de retirada:

2003-02-04

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES/PIPING, AND FITTINGS

ON CERTAIN SPORT UTILITY VEHICLES, IT MAY BE POSSIBLE FOR THE FRONT BRAKE LINE TO SLIP OUT OF THE RETAINING BRACKET LOCATED AT THE FRONT STRUT. THE BRAKE HOSE THAT IS ATTACHED TO THE BRAKE LINE COULD COME IN CONTACT WITH THE TIRE AND BE SUBJECTED TO WEAR AND ABRASION.