¿Dónde el VIN?
•
Sin VIN?
Obtenga reportes de EpicVIN
DURING ASSEMBLY THE UPPER STEERING COLUMN SHAFT PINCH BOLT MAY NOT HAVE BEEN SUFFICIENTLY TIGHTENED. MOVEMENT MAY OCCUR BETWEEN THE UPPER STEERING SHAFT AND THE YOKE, CAUSING ACCELERATED PINCH BOLT WEAR AT THE "WHISTLE SLOT" IN THE SHAFT. PINCH BOLT WEAR COULD CAUSE THE YOKE TO SLIP FROM THE SHAFT.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITHOUT THE RETAINER CLIP FOR THE BRAKE PEDAL PUSH ROD. THE ABSENCE OF THIS RETAINER CLIP COULD ALLOW THE BRAKE PEDAL TO DISENGAGE FROM THE MASTER CYCLINDER PUSH ROD.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH A BRAKE PEDAL SUPPORT BRACKET WHICH WAS DESIGNED FOR USE IN DIESEL ENGINE VEHICLES. THE INCORRECT BRACKET MAY CAUSE THE SERVICE BRAKES TO REMAIN PARTIALLY APPLIED, RESULTING IN BRAKE OVERHEATING AND REDUCED BRAKING EFFECTIVENESS.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITHOUT THE RETAINER CLIP FOR THE BRAKE PEDAL PUSH ROD. THE ABSENCE OF THIS RETAINER CLIP COULD ALLOW THE BRAKE PEDAL TO DISENGAGE FROM THE MASTER CYCLINDER PUSH ROD.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITHOUT THE RETAINER CLIP FOR THE BRAKE PEDAL PUSH ROD. THE ABSENCE OF THIS RETAINER CLIP COULD ALLOW THE BRAKE PEDAL TO DISENGAGE FROM THE MASTER CYCLINDER PUSH ROD.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH A BRAKE PEDAL SUPPORT BRACKET WHICH WAS DESIGNED FOR USE IN DIESEL ENGINE VEHICLES. THE INCORRECT BRACKET MAY CAUSE THE SERVICE BRAKES TO REMAIN PARTIALLY APPLIED, RESULTING IN BRAKE OVERHEATING AND REDUCED BRAKING EFFECTIVENESS.
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITHOUT THE RETAINER CLIP FOR THE BRAKE PEDAL PUSH ROD. THE ABSENCE OF THIS RETAINER CLIP COULD ALLOW THE BRAKE PEDAL TO DISENGAGE FROM THE MASTER CYCLINDER PUSH ROD.
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
ACCELERATOR PUMP LEVER RETAINING PIN MAY LOOSEN AFTER REPEATED HEAVY ACCELERATOR PEDAL APPLICATIONS. THIS COULD CAUSE THE THROTTLE TO BECOME STUCK IN THE OPEN POSITION.
Descubra consejos de expertos, sugerencias y noticias sobre la compra y el mantenimiento de vehículos usados.
Estos son los descapotables de cuatro plazas más vendidos en 2023.
Lea mas
En nuestro artículo, aprenderá a leer correctamente nuestros informes de histo...
Lea mas
Un artículo para aprender sobre la diferencia entre la marca y el modelo de un...
Lea mas