¿Dónde el VIN?
•
Sin VIN?
Obtenga reportes de EpicVIN
REAR AXLE ASSEMBLY MAY HAVE AXLES THAT WERE IMPROPERLY MANUFACTURED. THIS CONDITION MAY RESULT IN SEPARATION OF THE AXLE SHAFT AND WHEEL ASSEMBLY FROM THE VEHICLE.
EXCESSIVE ENLARGEMENT OF THE WHEEL CYLINDER PILOT HOLE IN THE REAR BRAKE BACKING PLATE COULD ALLOW THE WHEEL CYLINDER TO ROTATE AND CAUSE LOSS OF BRAKE FLUID. CONSEQUENCE OF DEFECT: A LOSS OF BRAKE FLUID LEADS TO LOSS OF REAR BRAKE ACTION, CREATING THE POTENTIAL FOR AN ACCIDENT. FRONT BRAKES WOULD REMAIN OPERATIONAL.
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
THE HYDRAULIC STEEL BRAKE TUBE CONNECTING THE BRAKE HOSE TO THE LEFT OR RIGHT FRONT TOP WHEEL CYLINDER MAY DEVELOP A FRACTURE IN THE BEND NEXT TO THE WHEEL CYLINDER. THIS FRACTURE RESULTS FROM PERIODIC HIGH STRESSES IN THE TUBE DUE TO "BRAKE CHATTER" WHICH CAN OCCUR DURING CERTAIN ENVIRONMENTAL CONDITIONS.
CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.
THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "ANCHORAGE OF SEATS", IN THAT THE FRONT SEAT ADJUSTER ASSEMBLIES HAVE LOCK BARS WHICH MAY NOT REMAIN ENGAGED WHEN TEST PROCEDURE FORCES ARE APPLIED TO THE SEAT.
THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "ANCHORAGE OF SEATS", IN THAT THE FRONT SEAT ADJUSTER ASSEMBLIES HAVE LOCK BARS WHICH MAY NOT REMAIN ENGAGED WHEN TEST PROCEDURE FORCES ARE APPLIED TO THE SEAT.
THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.
THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.
THE FRONT NUTS MAY NOT HAVE BEEN TIGHTENED TO SPECIFICATIONS. THESE NUTS COULD LOOSEN DURING VEHICLE OPERATION AND CAUSE THE FRONT HUB AND ROTOR ASSEMBLY TO SEPARATE FROM THE WHEEL AND TIRE ASSEMBLY.
Descubra consejos de expertos, sugerencias y noticias sobre la compra y el mantenimiento de vehículos usados.
Los informes del historial de vehículos de EpicVIN son más avanzados que nunca...
Lea mas
Descubra por qué EpicVIN es el orgulloso receptor del prestigioso premio 2023...
Lea mas
Aquí te contamos todo sobre el coche limón.
Lea mas
