2002 HONDA CR V Recall Check

Número de llamada a revisión:

02V251000

Fecha de retirada:

2002-09-17

Componentes:

SEATS

ON CERTAIN SPORT UTILITY VEHICLES, THE FRONT SEAT ANCHORAGE NUT STRENGTH IS INSUFFICIENT BECAUSE THE NUTS WERE INSTALLED IMPROPERLY.

Número de llamada a revisión:

01V351000

Fecha de retirada:

2001-11-30

Componentes:

SEAT BELTS: FRONT: WEBBING

VEHICLE DESCRIPTION: SPORT UTILITY VEHICLES EQUIPPED WITH AUTOMATIC SEAT BELT PRETENSIONS. THE CR-V IS EQUIPPED WITH TWO SEAT BELT PRETENSIONERS - RETRACTOR AND BUCKLE - IN BOTH THE DRIVER AND FRONT PASSENGER SEATING POSITIONS. SOME BUCKLE PRETENSIONERS USE A PART THAT RESTRICTS THE FULL MOTION OF THE MECHANISM.

Número de llamada a revisión:

04V255000

Fecha de retirada:

2004-06-08

Componentes:

AIR BAGS: FRONTAL

ON CERTAIN SPORT UTILITY VEHICLES, THE WIRE HARNESS OF THE DRIVER'S FRONT AIR BAG WAS INCORRECTLY WIRED.

Número de llamada a revisión:

03V422000

Fecha de retirada:

2003-10-30

Componentes:

ELECTRICAL SYSTEM: IGNITION: SWITCH

ON CERTAIN SPORT UTILITY VEHICLES, METAL PARTICLES IN THE KEY CYLINDER BODY COULD INTERFERE WITH THE INTERLOCK LEVER OPERATION, MAKING IT POSSIBLE TO REMOVE THE IGNITION KEY WITHOUT SHIFTING THE TRANSMISSION TO "PARK."

Número de llamada a revisión:

03V274000

Fecha de retirada:

2003-07-30

Componentes:

POWER TRAIN: AUTOMATIC TRANSMISSION

ON CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS, EXCESSIVE CORROSION OF THE SHIFT CABLE LINKAGE COULD PREVENT THE DRIVER FROM SHIFTING THE AUTOMATIC TRANSMISSION INTO PARK.

Número de llamada a revisión:

07E104000

Fecha de retirada:

2007-12-11

Componentes:

VISIBILITY: GLASS, SIDE/REAR

CERTAIN CURVED TEMPERED REPLACEMENT GLASS MANUFACTURED BY HANGZHOU SAFETY GLASS LTD AND SUPPLIED TO SAFELITE BY AUTO TEMP INC., IDENTIFIED AS DOT-430, AND SOLD FOR USE ON CERTAIN DOMESTIC AND FOREIGN VEHICLES MAY NOT BREAK INTO SMALL PIECES AS EXPECTED OF TEMPERED GLASS AND FAILS TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 205, "GLAZING MATERIALS."

Número de llamada a revisión:

12V486000

Fecha de retirada:

2012-10-05

Componentes:

ELECTRICAL SYSTEM

Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.

Número de llamada a revisión:

12V486000

Fecha de retirada:

2012-10-05

Componentes:

VISIBILITY: POWER WINDOW DEVICES AND CONTROLS

Honda is recalling certain model year 2002-2006 CR-V passenger vehicles, manufactured from February 19, 2002, through July 28, 2006. The driver-side power window switch may fail or melt.

Número de llamada a revisión:

12V136000

Fecha de retirada:

2012-03-30

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS: SWITCH

HONDA IS RECALLING CERTAIN MODEL YEAR 2002 THROUGH 2004 CR-V; MODEL YEAR 2003 THROUGH 2005 PILOT; AND MODEL YEAR 2002 AND 2003 CIVIC VEHICLES. IN MARCH 2012, HONDA FILED A DEFECT REPORT TO RECALL CERTAIN MODEL YEAR 2002 THROUGH 2004 CR-V AND CERTAIN MODEL YEAR 2003 PILOT VEHICLES. IN AUGUST 2012, HONDA INFORMED THE AGENCY THAT IT WAS INCLUDING AN ADDITIONAL 820,789 VEHICLES INCLUDING CERTAIN MODEL YEAR 2004 AND 2005 PILOTS AND MODEL YEAR 2002 AND 2003 CIVICS. THE TOTAL NUMBER OF VEHICLES BEING RECALLED IS NOW 1,375,217. DUE TO TENSION FROM THE COMBINATION SWITCH WIRING HARNESS, WEAR ON THE SURFACE OF THE ELECTRICAL TERMINAL CAN OCCUR, YIELDING COPPER OXIDE, WHICH INCREASES ELECTRICAL RESISTANCE. INCREASED ELECTRICAL RESISTANCE MAY CAUSE THE TERMINAL ENDS TO MELT WITHIN THE WIRING HARNESS CONNECTOR.

Número de llamada a revisión:

15V320000

Fecha de retirada:

2015-05-28

Componentes:

AIR BAGS: FRONTAL: DRIVER SIDE: INFLATOR MODULE

Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion and other factors, including manufacturing variability that, over time, could cause the inflator to rupture.