Verificación de retiro del mercado MAZDA TRIBUTE 2005

Número de llamada a revisión:

06V116000

Fecha de retirada:

2006-04-12

Componentes:

SEATS: FRONT ASSEMBLY: HEAD RESTRAINT

CERTAIN SPORT UTILITY VEHICLES EQUIPPED WITHOUT SIDE AIR CURTAINS OR MOON ROOFS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACT." DURING TESTING, THE FREE MOTION HEAD FORM REGISTERED A MEASUREMENT ABOVE THE PERMITTED LIMIT AT THE LEFT HAND A-PILLAR TRIM AREA.

Número de llamada a revisión:

04V605000

Fecha de retirada:

2004-12-23

Componentes:

LATCHES/LOCKS/LINKAGES: HATCHBACK/LIFTGATE: LOCK

CERTAIN 2004-2005 SPORT UTILITY VEHICLES AND CERTAIN 2001-2003 SPORT UTILITY VEHICLE HAVING REAR LIFTGATE COMPONENTS SERVICED WITH 2004 EQUIVALENT COMPONENTS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, 'DOOR LOCKS AND DOOR RETENTION COMPONENTS.' THE REAR LIFTGATE LATCHING SYSTEM DOES NOT MEET THE INERTIA LOAD REQUIREMENT IN ONE DIRECTION.

Número de llamada a revisión:

12V357000

Fecha de retirada:

2012-07-27

Componentes:

ENGINE AND ENGINE COOLING

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

Número de llamada a revisión:

12V357000

Fecha de retirada:

2012-07-27

Componentes:

VEHICLE SPEED CONTROL: CABLES

Mazda is recalling certain model year 2001 through 2006, and 2008, Tribute vehicles equipped with 3.0L V6 engines and speed control. Inadequate clearance between the engine cover and the speed control cable connector could result in a stuck throttle when the accelerator pedal is fully or almost-fully depressed. This risk exists regardless of whether or not speed control (cruise control) is used.

Número de llamada a revisión:

15E045000

Fecha de retirada:

2015-06-03

Componentes:

SUSPENSION: FRONT: WHEEL BEARING

The Timken Company (Timken) is recalling certain aftermarket front wheel bearings, part number 510072, sold from January 22, 2015, to May 21, 2015, to be used as service parts on 2001-2012 Ford Escape, 2001-2011 Mazda Tribute, and 2005-2011 Mercury Mariner vehicles. The affected wheel bearings have incorrect dimensions of a 42mm bore, 76mm outer dimension, and 39mm width, instead of a 42mm bore, 78mm outer dimension and a 45mm width.