Verificación de retiro del mercado NISSAN SENTRA 2001

Número de llamada a revisión:

01V376000

Fecha de retirada:

2001-12-20

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS

VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE VEHICLES WERE MISSING TAMPERPROOF CAPS THAT PREVENT HORIZONTAL HEADLAMP ADJUSTMENT.

Número de llamada a revisión:

01V357000

Fecha de retirada:

2001-11-30

Componentes:

ENGINE AND ENGINE COOLING: ENGINE: GASOLINE

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A 1.8 LITER ENGINE. THE ENGINE COULD STOP RUNNING WHILE BEING DRIVEN DUE TO A DEFECTIVE CRANK POSITION SENSOR. THIS COULD ALSO RESULT IN THE "SERVICE ENGINE SOON" WARNING LIGHT COMING ON OR REDUCED ENGINE POWER.

Número de llamada a revisión:

01V174000

Fecha de retirada:

2001-06-01

Componentes:

SUSPENSION: FRONT: CONTROL ARM: LOWER ARM

VEHICLE DESCRIPTION: PASSENGER VEHICLES. ONE OR MORE OF THE THREE BOLTS USED TO ATTACH EACH FRONT SUSPENSION LOWER CONTROL ARM TO THE BODY ON THE LEFT AND RIGHT SIDES MAY NOT HAVE BEEN PROPERLY MANUFACTURED.

Número de llamada a revisión:

01V277000

Fecha de retirada:

2001-09-06

Componentes:

WHEELS

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE COOLING HOLES IN THE STEEL WHEEL MAY HAVE BURRS ON THEIR EDGES AS A RESULT OF IMPROPER MANUFACTURING. THESE BURRS CAN CAUSE CRACKS AS THE VEHICLE IS BEING DRIVEN. CRACKS CAN PROPAGATE BETWEEN ADJACENT COOLING HOLES. IF ENOUGH CRACKS DEVELOP BETWEEN THE COOLING HOLES, THE WHEEL COULD FAIL AND SEPARATE FROM THE MOUNTING HUB WITHOUT PRIOR WARNING.

Número de llamada a revisión:

03V477000

Fecha de retirada:

2003-11-24

Componentes:

ELECTRICAL SYSTEM: IGNITION: MODULE

ON CERTAIN PASSENGER VEHICLES EQUIPPED WITH THE QG18DE ENGINE OR QR25DE ENGINES, THE FOAM MATERIAL USED FOR THE INTERIOR LINING OF THE ELECTRONIC CONTROL MODULE (ECM) BOX EMITS SULFUR AS IT CURES.

Número de llamada a revisión:

03V455000

Fecha de retirada:

2003-11-19

Componentes:

ENGINE AND ENGINE COOLING

ON CERTAIN PASSENGER VEHICLES, THE CIRCUIT BOARD FOR THE CRANK POSITION SENSOR OR CAM POSITION SENSOR MAY HAVE AN IMPROPER SOLDER JOINT DUE TO SOLDER DEFORMATION CAUSED BY HEAT STRESS ACCELERATED BY THE EXISTENCE OF FLUX RESIDUE DURING THE SOLDERING PROCESS.

Número de llamada a revisión:

03V511000

Fecha de retirada:

2003-12-11

Componentes:

ENGINE AND ENGINE COOLING

ON CERTAIN ELECTRIC VEHICLES, THE FRONT SUSPENSION TRANSVERSE LINK'S BALL JOINT BRACKET MAY BREAK FROM STRESS CONCENTRATION AT A NOTCH CREATED BY SURFACE ROUGHNESS AND THE SHAPE OF THE MATERIAL CUT-LINE.

Número de llamada a revisión:

06E023000

Fecha de retirada:

2006-03-14

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS

CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."