TOYOTA CAMRY Recall Check

Número de llamada a revisión:

01V072000

Fecha de retirada:

2001-03-08

Componentes:

STRUCTURE: FRAME AND MEMBERS

VEHICLE DESCRIPTION: PASSENGER VEHICLES. THE FRONT SUB FRAME ASSEMBLY HAS NOT BEEN ADEQUATELY WELDED.

Número de llamada a revisión:

09E025000

Fecha de retirada:

2009-05-11

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS

DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Número de llamada a revisión:

01V012000

Fecha de retirada:

2001-01-17

Componentes:

VEHICLE SPEED CONTROL

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH CRUISE CONTROL AND V6 ENGINES, AND BUILT AT ONE OF TWO LINES AT THE KENTUCKY PLANT. THE ACCELERATOR CABLE HOUSING COULD BE DEFORMED AT THE CRUISE CONTROL ACTUATOR-TO-THROTTLE BODY CONNECTION. THE ACCELERATOR INNER-CABLE COULD WEAR AWAY AND EVENTUALLY BREAK.

Número de llamada a revisión:

06E026000

Fecha de retirada:

2006-03-23

Componentes:

EXTERIOR LIGHTING

CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Número de llamada a revisión:

00V154000

Fecha de retirada:

2000-06-07

Componentes:

SUSPENSION: REAR

VEHICLE DESCRIPTION: PASSENGER VEHICLES. DUE TO IMPROPER HEAT TREATMENT, THE REAR AXLE MAY NOT HAVE ADEQUATE STRENGTH IN SOME AREAS.

Número de llamada a revisión:

09E025000

Fecha de retirada:

2009-05-11

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS

DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Número de llamada a revisión:

01V012000

Fecha de retirada:

2001-01-17

Componentes:

VEHICLE SPEED CONTROL

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH CRUISE CONTROL AND V6 ENGINES, AND BUILT AT ONE OF TWO LINES AT THE KENTUCKY PLANT. THE ACCELERATOR CABLE HOUSING COULD BE DEFORMED AT THE CRUISE CONTROL ACTUATOR-TO-THROTTLE BODY CONNECTION. THE ACCELERATOR INNER-CABLE COULD WEAR AWAY AND EVENTUALLY BREAK.

Número de llamada a revisión:

06E026000

Fecha de retirada:

2006-03-23

Componentes:

EXTERIOR LIGHTING

CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Número de llamada a revisión:

09E025000

Fecha de retirada:

2009-05-11

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS

DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Número de llamada a revisión:

01V012000

Fecha de retirada:

2001-01-17

Componentes:

VEHICLE SPEED CONTROL

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH CRUISE CONTROL AND V6 ENGINES, AND BUILT AT ONE OF TWO LINES AT THE KENTUCKY PLANT. THE ACCELERATOR CABLE HOUSING COULD BE DEFORMED AT THE CRUISE CONTROL ACTUATOR-TO-THROTTLE BODY CONNECTION. THE ACCELERATOR INNER-CABLE COULD WEAR AWAY AND EVENTUALLY BREAK.