FORD Recall Check

Akcja serwisowa nr:

79V117000

Data wycofania:

1979-10-12

Podzespoły:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Akcja serwisowa nr:

79V117000

Data wycofania:

1979-10-12

Podzespoły:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Akcja serwisowa nr:

79V117000

Data wycofania:

1979-10-12

Podzespoły:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Akcja serwisowa nr:

79V117000

Data wycofania:

1979-10-12

Podzespoły:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Akcja serwisowa nr:

79V116000

Data wycofania:

1979-10-12

Podzespoły:

STRUCTURE: FRAME AND MEMBERS

THE INVOLVED VEHICLES WERE PRODUCED WITH FRAMES THAT MAY HAVE INADEQUATELY WELDED #2 CROSSMEMBER ASSEMBLIES. THIS COULD OCCUR IF CERTAIN MANUAL WELD OPERATIONS WERE NOT PERFORMED DURING FRAME FABRICATION. SEVERE OPERATING CONDITIONS WHICH MAY OCCUR IN POLICE DUTY, MAY CAUSE CRACKING AROUND THE GUSSET, ALLOWING IT TO SEPARATE FROM THE FRAME.

Akcja serwisowa nr:

79V117000

Data wycofania:

1979-10-12

Podzespoły:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Akcja serwisowa nr:

79V117000

Data wycofania:

1979-10-12

Podzespoły:

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES WERE PRODUCED WITH BRAKE PUSH-ROD TO BRAKE PEDAL RETAINING PINS WHICH WERE NOT HEAT-TREATED AS SPECIFIED. THIS COULD ALLOW THE BRAKE PEDAL TO BECOME DISENGAGED FROM THE PUSH-ROD.

Akcja serwisowa nr:

79V035000

Data wycofania:

1979-10-12

Podzespoły:

STEERING: LINKAGES: KNUCKLE: SPINDLE: ARM

THE INVOLVED VEHICLES WERE ASSEMBLED WITH IMPROPERLY MANUFACTURED STEERING ARM KNUCKLES. SHOULD AN IMPROPERLY MANUFACTURED STEERING ARM KNUCKLE FRACTURE AND SEPARATE, THE STEERING LINKAGE TIE ROD MAY DISENGAGE FROM THE KNUCKLE.

Akcja serwisowa nr:

80V167000

Data wycofania:

1981-01-13

Podzespoły:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES/PIPING, AND FITTINGS

SOME OF THE SUBJECT VEHICLES MAY HAVE BEEN BUILT WITH FRONT WHEEL BRAKE HOSES THAT ARE TOO LONG. THIS MAY MAKE IT POSSIBLE FOR THE BRAKE HOSE TO CONTACT A FRONT TIRE DURING A FULL LEFT OR RIGHT TURN, WHICH COULD RESULT IN CHAFING OF THE BRAKE HOSE AND SUBSEQUENT BRAKE FLUID LEAKAGE.

Akcja serwisowa nr:

79V035000

Data wycofania:

1979-10-12

Podzespoły:

STEERING: LINKAGES: KNUCKLE: SPINDLE: ARM

THE INVOLVED VEHICLES WERE ASSEMBLED WITH IMPROPERLY MANUFACTURED STEERING ARM KNUCKLES. SHOULD AN IMPROPERLY MANUFACTURED STEERING ARM KNUCKLE FRACTURE AND SEPARATE, THE STEERING LINKAGE TIE ROD MAY DISENGAGE FROM THE KNUCKLE.