CHEVROLET MALIBU Recall Check

Número de llamada a revisión:

81V025000

Fecha de retirada:

1981-03-06

Componentes:

SUSPENSION: REAR

THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.

Número de llamada a revisión:

79V196000

Fecha de retirada:

1979-12-11

Componentes:

SEATS: FRONT ASSEMBLY: HEAD RESTRAINT

THE INVOVLED VEHICLES FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACTS". INCORRECT HEAD RESTRAINTS MAY HAVE BEEN INSTALLED.

Número de llamada a revisión:

84V149000

Fecha de retirada:

1984-11-27

Componentes:

POWER TRAIN: AXLE ASSEMBLY: AXLE SHAFT

REAR AXLE ASSEMBLY MAY HAVE AXLES THAT WERE IMPROPERLY MANUFACTURED. THIS CONDITION MAY RESULT IN SEPARATION OF THE AXLE SHAFT AND WHEEL ASSEMBLY FROM THE VEHICLE.

Número de llamada a revisión:

85V048000

Fecha de retirada:

1985-05-01

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DRUM: WHEEL CYLINDERS

EXCESSIVE ENLARGEMENT OF THE WHEEL CYLINDER PILOT HOLE IN THE REAR BRAKE BACKING PLATE COULD ALLOW THE WHEEL CYLINDER TO ROTATE AND CAUSE LOSS OF BRAKE FLUID. CONSEQUENCE OF DEFECT: A LOSS OF BRAKE FLUID LEADS TO LOSS OF REAR BRAKE ACTION, CREATING THE POTENTIAL FOR AN ACCIDENT. FRONT BRAKES WOULD REMAIN OPERATIONAL.

Número de llamada a revisión:

07E088000

Fecha de retirada:

2007-10-30

Componentes:

EQUIPMENT

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

Número de llamada a revisión:

81V025000

Fecha de retirada:

1981-03-06

Componentes:

SUSPENSION: REAR

THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.

Número de llamada a revisión:

78V139000

Fecha de retirada:

1979-10-12

Componentes:

ENGINE AND ENGINE COOLING: COOLING SYSTEM: FAN

THE HUB PORTION OF THE FAN BLADE ASSEMBLY COULD CRACK DUE TO HIGH STRESS LEVELS GENERATED DURING ENGINE OPERATING CONDITIONS. EVENTUALLY, THE BLADE COULD BREAK APART AT THE HUB AND BLADE PIECES COULD BE PROPELLED INTO THE ENGINE. IF THE HOOD IS OPEN WHILE THE ENGINE IS RUNNING, THE FRAGMENTS WOULD BE FREE TO FLY FROM THE VEHICLE.

Número de llamada a revisión:

77V181000

Fecha de retirada:

1979-10-12

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DRUM: WHEEL CYLINDERS

THE REAR BRAKE WHEEL CYLINDER RETAINER ON THE INVOLVED VEHICLES MAY NOT HAVE BEEN PROPERLY INSTALLED. SHOULD THE WHEEL CYLINDER RETAINER BECOME COMPLETELY DISENGAGED, THE WHEEL CYLINDER COULD MOVE OUTBOARD CAUSING A LOSS OF BRAKE FLUID AND A LOSS OF REAR BRAKING ACTION.

Número de llamada a revisión:

78V115000

Fecha de retirada:

1979-10-12

Componentes:

SEATS: FRONT ASSEMBLY: HEAD RESTRAINT

INCORRECT HEAD RESTRAINTS MAY HAVE BEEN INSTALLED ON THE INVOLVED VEHICLES. THIS FAILS TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACTS".

Número de llamada a revisión:

79V175000

Fecha de retirada:

1979-10-12

Componentes:

SUSPENSION: FRONT: WHEEL BEARING

UNDER CERTAIN DRIVING CONDITIONS, THESE VEHICLES CAN EXPERIENCE TEMPERATURES IN THE FRONT WHEEL OUTER BEARING AREA WHICH CAN AFFECT THE WHEEL BEARING GREASE. THIS CAN RESULT IN INADEQUATE LUBRICATION OF THE BEARING. THIS CONDITION MAY BE FURTHER AGGRAVATED BY IMPROPER ADJUSTMENT OF THE FRONT WHEEL SPINDLE NUT.