Verificación de retiro del mercado de FORD

Número de llamada a revisión:

90V121000

Fecha de retirada:

1990-06-26

Componentes:

SERVICE BRAKES, AIR: CONTROLS

SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY.

Número de llamada a revisión:

93E035000

Fecha de retirada:

1993-10-25

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DRUM: DRUM

THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.

Número de llamada a revisión:

90V121000

Fecha de retirada:

1990-06-26

Componentes:

SERVICE BRAKES, AIR: CONTROLS

SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY.

Número de llamada a revisión:

90V121000

Fecha de retirada:

1990-06-26

Componentes:

SERVICE BRAKES, AIR: CONTROLS

SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY.

Número de llamada a revisión:

90V121000

Fecha de retirada:

1990-06-26

Componentes:

SERVICE BRAKES, AIR: CONTROLS

SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY.

Número de llamada a revisión:

90V121000

Fecha de retirada:

1990-06-26

Componentes:

SERVICE BRAKES, AIR: CONTROLS

SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY.

Número de llamada a revisión:

90V121000

Fecha de retirada:

1990-06-26

Componentes:

SERVICE BRAKES, AIR: CONTROLS

SECONDARY SERVICE RESERVOIR AIR CHECK VALVES MAY NOT SEAT PROPERLY DUE TO A MECHANICAL INTERFERENCE CONDITION BETWEEN A CIRCULAR BRASS GUIDE AND THE WALL OF A CYLINDRICAL FERRULE IN WHICH THE BRASS GUIDE IS INTENDED TO MOVE FREELY.

Número de llamada a revisión:

08E050000

Fecha de retirada:

2008-08-14

Componentes:

EXTERIOR LIGHTING: HEADLIGHTS

K2 MOTOR IS RECALLING 1,921 AFTERMARKET HEADLAMPS OF VARIOUS MODELS SOLD FOR USE ON THE ABOVE LISTED VEHICLES. THESE HEADLAMPS ARE MISSING THE AMBER SIDE REFLEX REFLECTOR WHICH FAILS TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Número de llamada a revisión:

92V113000

Fecha de retirada:

1992-08-24

Componentes:

SEAT BELTS: FRONT: BUCKLE ASSEMBLY

THE RIGID MOUNTED SAFETY BELT BUCKLES ARE DEFECTIVE IN THREE WAYS. FIRST, A FASTENED SAFETY BELT BUCKLE WILL NOT UNLATCH WHEN THE RELEASE BUTTON IS DEPRESSED. THIS RESULTS FROM INTERFERENCE BETWEEN THE BUCKLE EJECTOR FINGER AND THE BUCKLE TONGUE WINDOW. THE SECOND DEFECT IS THE SAFETY BELT BUCKLE MAY NOT LATCH. THE THIRD POSSIBLE DEFECT IS THAT THE TONGUE MAY BE RETAINED BY THE BUCKLE, BUT IT MAY NOT BE LATCHED SUFFICIENTLY TO PROVIDE OCCUPANT PROTECTION.

Número de llamada a revisión:

98E010000

Fecha de retirada:

1998-04-09

Componentes:

SERVICE BRAKES, AIR: DISC: ROTOR

EQUIPMENT DESCRIPTION: AFTERMARKET BRAKE ROTORS FOR USE ON CERTAIN FORD AND MAZDA TRUCKS. CRACKED CASTINGS CAUSED CRACKS TO APPEAR ON THE OUTER DIAMETER OF THE ROTOR HAT OR AROUND THE STUD HOLE.