Verificación de retiro del mercado de FORD

Número de llamada a revisión:

89V150000

Fecha de retirada:

1989-09-26

Componentes:

VISIBILITY: DEFROSTER/DEFOGGER/HVAC SYSTEM: HEATER CORE

HEATER HOSE MAY BE INCORRECTLY ROUTED.

Número de llamada a revisión:

07E064000

Fecha de retirada:

2007-08-24

Componentes:

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.

Número de llamada a revisión:

87V017000

Fecha de retirada:

1987-03-02

Componentes:

VISIBILITY: WINDSHIELD WIPER/WASHER: MOTOR

ROAD SALT INDUCED EROSION OF THE WIPER MOTOR CONDUCTOR STRIPS COULD CAUSE LOCALIZED THERMAL STRESS WITHIN THE GLASS.

Número de llamada a revisión:

86V144000

Fecha de retirada:

1986-10-29

Componentes:

STEERING: STEERING WHEEL/HANDLE BAR

STEERING SHAFT ASSEMBLIES CONTAIN LOWER SHAFTS OF INSUFFICIENT LENGTH FOR PROPER ATTACHMENT TO THE SHAFT INSULATOR FLANGE. CONSEQUENCE OF DEFECT: SHAFT COULD SEPARATE, RESULTING IN TOTAL LOSS OF STEERING CONTROL AND A POSSIBLE ACCIDENT.

Número de llamada a revisión:

89V226000

Fecha de retirada:

1990-01-02

Componentes:

SEAT BELTS: FRONT: ANCHORAGE

VANS WERE PRODUCED WITHOUT PLASTIC COVER DESIGNED TO COVER OUTBOARD SEAT BACK PIVOT HINGE ALLOWING WEBBING OF FRONT PASSENGER-SIDE SAFETY BELTS TO BECOME ABRADED OR CUT DUE TO CONTACT WITH EXPOSED HINGE.

Número de llamada a revisión:

07E064000

Fecha de retirada:

2007-08-24

Componentes:

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.

Número de llamada a revisión:

91V134000

Fecha de retirada:

1991-08-07

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DISC: ROTOR

FRONT DISC BRAKE ROTORS OF THE SUBJECT VEHICLES MAY EXPERIENCE SEVERE CORROSION IF OPERATED IN AREAS WHERE CALCIUM CHLORIDE AND SODIUM CHLORIDE ARE USED EXTENSIVELY.

Número de llamada a revisión:

07E064000

Fecha de retirada:

2007-08-24

Componentes:

FUEL SYSTEM, GASOLINE: DELIVERY: FUEL PUMP

CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.

Número de llamada a revisión:

86V048000

Fecha de retirada:

1986-04-01

Componentes:

VISIBILITY: REARVIEW MIRRORS/DEVICES: EXTERIOR

THE OUTSIDE REAR VIEW MIRRORS DO NOT MEET THE 50 SQUARE INCH MINIMUM REQUIREMENT OF FMVSS 111-REARVIEW MIRRORS. CONSEQUENCE OF DEFECT: THE STANDARD REQUIRES A MINIMUM DIMENSION FOR REARVIEW MIRRORS TO PROVIDE ADEQUATE FIELD OF VISION WHICH AIDS IN PREVENTING ACCIDENTS.

Número de llamada a revisión:

87V113000

Fecha de retirada:

1987-07-22

Componentes:

ENGINE AND ENGINE COOLING: EXHAUST SYSTEM: EMISSION CONTROL

EXPULSION OF FUEL DUE TO OVERPRESSURIZATION.