¿Dónde el VIN?
•
Sin VIN?
Obtenga reportes de EpicVIN
CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE.
CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE.
CERTAIN VEHICLES WERE PRODUCED WITH WHEEL ASSEMBLIES THAT MAY HAVE CRACKS NEAR THE BOLT HOLES IN THE WHEEL DISC. DURING VEHICLE USE, THE CRACKS COULD GRADUALLY INCREASE AND RESULT IN PARTIAL OR COMPLETE SEPARATION OF THE WHEEL AND TIRE ASSEMBLY FROM THE VEHICLE.
CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
THE MASTER CYLINDER TO CHASIS BRAKE TUBE AND HOSE ASSEMBLIES MAY HAVE BEEN MOVED FROM THEIR INTENDED POSITION, WHICH COULD ALLOW CHAFING AGAINST UNDERBODY COMPONENTS. CHAFING PROMOTES WEAR OF THE BRAKE TUBE AND HOSE ASSEMBLY AND COULD CAUSE A LOSS OF BRAKE FLUID.
THE MASTER CYLINDER TO CHASIS BRAKE TUBE AND HOSE ASSEMBLIES MAY HAVE BEEN MOVED FROM THEIR INTENDED POSITION, WHICH COULD ALLOW CHAFING AGAINST UNDERBODY COMPONENTS. CHAFING PROMOTES WEAR OF THE BRAKE TUBE AND HOSE ASSEMBLY AND COULD CAUSE A LOSS OF BRAKE FLUID.
THE MASTER CYLINDER TO CHASIS BRAKE TUBE AND HOSE ASSEMBLIES MAY HAVE BEEN MOVED FROM THEIR INTENDED POSITION, WHICH COULD ALLOW CHAFING AGAINST UNDERBODY COMPONENTS. CHAFING PROMOTES WEAR OF THE BRAKE TUBE AND HOSE ASSEMBLY AND COULD CAUSE A LOSS OF BRAKE FLUID.
THE MASTER CYLINDER TO CHASIS BRAKE TUBE AND HOSE ASSEMBLIES MAY HAVE BEEN MOVED FROM THEIR INTENDED POSITION, WHICH COULD ALLOW CHAFING AGAINST UNDERBODY COMPONENTS. CHAFING PROMOTES WEAR OF THE BRAKE TUBE AND HOSE ASSEMBLY AND COULD CAUSE A LOSS OF BRAKE FLUID.
THE MASTER CYLINDER TO CHASIS BRAKE TUBE AND HOSE ASSEMBLIES MAY HAVE BEEN MOVED FROM THEIR INTENDED POSITION, WHICH COULD ALLOW CHAFING AGAINST UNDERBODY COMPONENTS. CHAFING PROMOTES WEAR OF THE BRAKE TUBE AND HOSE ASSEMBLY AND COULD CAUSE A LOSS OF BRAKE FLUID.
THE INVOLVED VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE STANDARD NO. 124, "ACCELERATOR CONTROL SYSTEMS", DUE TO FAILURE OF THE THROTTLE TO RETURN COMPLETELY TO IDLE UNDER CERTAIN CONDITIONS WITH ONE OF THE TWO ACCELERATOR CONTROL RETURN SPRINGS INOPERATIVE.
Descubra consejos de expertos, sugerencias y noticias sobre la compra y el mantenimiento de vehículos usados.
En nuestro artículo, aprenderá a leer correctamente nuestros informes de histo...
Lea mas
Sumérgete en esta guía para entender qué es un coche con título de salvamento.
Lea mas
En este post, repasaremos los tipos más comunes de títulos de marca.
Lea mas
