¿Dónde el VIN?
•
Sin VIN?
Obtenga reportes de EpicVIN
SOME OF THESE VEHICLES WERE PRODUCED WITH MISINDEXED FRONT BRAKE HOSES WHICH COULD CONTACT A TIRE OR WHEEL IN A FULL-TURN CONDITION. CHAFING AND WEAR TO THE BRAKE HOSE COULD RESULT IN LOSS OF BRAKE FLUID AND FRONT WHEEL BRAKING CAPABILITY.
CRACKS MAY DEVELOP IN THE SPIDER MEMBER OF SEVEN BLADE FANS DUE TO VIBRATIONS OF GREATER SEVERITY THAN ANTICIPATED. THE CRACKS MAY PROGRESS TO THE POINT OF FRACTURE AND ALLOW PORTIONS OF THE SPIDER ARMS AND ATTACHED BLADES TO SEPARATE.
THE AIR BRAKE LINES MAY BE ROUTED TOO CLOSE TO THE EXHAUST MUFFLER. BECAUSE THE AIR BRAKE LINES ARE MADE OF NYLON MATERIAL, HEAT FROM THE EXHAUST MUFFLER CAN WEAKEN THE BRAKE LINE TUBES, POSSIBLY CAUSING THEM TO RUPTURE. TUBE RUPTURE COULD RESULT IN LOSS OF AIR IN THE SECONDARY AIR BRAKE SYSTEM.
CERTAIN FEDERAL-MOGUL AFTERMARKET FUEL PUMPS SOLD UNDER THE BRAND NAMES OF CARTER, ACCUFLOW, NAPA, TRUFLOW, PARTS DEPO, AND PARTS MASTER, SHIPPED BETWEEN AUGUST 2006 AND JULY 2007 FOR USE ON THE VEHICLES LISTED ABOVE. THE FUEL PUMP DIAPHRAGM IN CERTAIN PRODUCTION RUNS MAY HAVE BEEN IMPROPERLY INSTALLED OR INADEQUATELY TESTED WHICH MAY CAUSE THE FUEL PUMP TO LEAK.
THE AIR BRAKE LINES MAY BE ROUTED TOO CLOSE TO THE EXHAUST MUFFLER. BECAUSE THE AIR BRAKE LINES ARE MADE OF NYLON MATERIAL, HEAT FROM THE EXHAUST MUFFLER CAN WEAKEN THE BRAKE LINE TUBES, POSSIBLY CAUSING THEM TO RUPTURE. TUBE RUPTURE COULD RESULT IN LOSS OF AIR IN THE SECONDARY AIR BRAKE SYSTEM.
COOLING FAN BLADES MAY CRACK AND SEPARATE BECAUSE THEY CANNOT WITHSTAND STRESS FROM VIBRATIONS THAT OCCUR DURING NORMAL ENGINE OPERATION.
CRACKS MAY DEVELOP IN THE SPIDER MEMBER OF SEVEN BLADE FANS DUE TO VIBRATIONS OF GREATER SEVERITY THAN ANTICIPATED. THE CRACKS MAY PROGRESS TO THE POINT OF FRACTURE AND ALLOW PORTIONS OF THE SPIDER ARMS AND ATTACHED BLADES TO SEPARATE.
THE OPTIONAL TANDEM SUSPENSION ASSEMBLY MAY HAVE BEEN INSTALLED USING A STANDARD BEAM END ADAPTER KIT, RATHER THAN THE REQUIRED SPECIAL KIT. PROGRESSIVE DETERIORATION COULD OCCUR TO THE ADAPTER TO BEAM END BUSHING JOINT, POSSIBLY RESULTING IN FRACTURE OF THE BEAM TO AXLE ATTACHING BOLTS.
COOLING FAN BLADES MAY CRACK AND SEPARATE BECAUSE THEY CANNOT WITHSTAND STRESS FROM VIBRATIONS THAT OCCUR DURING NORMAL ENGINE OPERATION.
CRACKS MAY DEVELOP IN THE SPIDER MEMBER OF SEVEN BLADE FANS DUE TO VIBRATIONS OF GREATER SEVERITY THAN ANTICIPATED. THE CRACKS MAY PROGRESS TO THE POINT OF FRACTURE AND ALLOW PORTIONS OF THE SPIDER ARMS AND ATTACHED BLADES TO SEPARATE.
Descubra consejos de expertos, sugerencias y noticias sobre la compra y el mantenimiento de vehículos usados.
El segmento de los SUV subcompactos se ha expandido rápidamente a medida que l...
Lea mas
Nuestro equipo le dirá qué debe buscar al comprar un automóvil usado
Lea mas
Nuestro equipo le dirá cómo leer los números de VIN de Porsche
Lea mas
