MAZDA Recall Check

Número de llamada a revisión:

92V159000

Fecha de retirada:

1992-11-10

Componentes:

UNKNOWN OR OTHER

A HARDTOP HOIST ACCESSORY KIT WAS SOLD TO CUSTOMERS WHO HAVE THE MIATA WITH A HARDTOP. THE PLASTIC BUCKLES USED TO ADJUST STRAP TENSION CAN BREAK AFTER THE HARDTOP HAS BEEN SUSPENDED BY THE HOIST.

Número de llamada a revisión:

93V174000

Fecha de retirada:

1993-11-01

Componentes:

STRUCTURE: BODY: DOOR

RESIN MOLDED FRONT HANDLES FAIL AT THE DOOR LATCH ACTUATING ROD ATTACHMENT, FREEING THE ROD TO FALL INSIDE THE DOOR FRAME. SUBSEQUENT LOWERING OF THE ASSOCIATED WINDOW MAY FORCE THE ACTUATING ROD DOWNWARD AND RELEASE THE DOOR LATCH.

Número de llamada a revisión:

06E049000

Fecha de retirada:

2006-06-05

Componentes:

EXTERIOR LIGHTING

CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Número de llamada a revisión:

97V211000

Fecha de retirada:

1997-11-20

Componentes:

SEAT BELTS: FRONT: WEBBING

VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH FRONT SEAT AUTOMATIC SHOULDER BELTS. THE RAIL OF THE AUTOMATIC SHOULDER BELT CAN WEAR SUFFICIENTLY SUCH THAT THE CABLE WHICH RETRACTS THE BUCKLE ASSEMBLY CAN BECOME JAMMED IN THE RAIL RENDERING THE SHOULDER BELT INOPERATIVE.

Número de llamada a revisión:

95V103005

Fecha de retirada:

1995-05-24

Componentes:

SEAT BELTS: FRONT: BUCKLE ASSEMBLY

THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Número de llamada a revisión:

95V103005

Fecha de retirada:

1995-05-24

Componentes:

SEAT BELTS: FRONT: BUCKLE ASSEMBLY

THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.

Número de llamada a revisión:

93E035000

Fecha de retirada:

1993-10-25

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DRUM: DRUM

THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.

Número de llamada a revisión:

93E035000

Fecha de retirada:

1993-10-25

Componentes:

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: DRUM: DRUM

THE GROOVE FOR THE REAR WHEEL BEARING RETAINER RING WAS INCORRECTLY MACHINED.

Número de llamada a revisión:

90E043002

Fecha de retirada:

1990-10-31

Componentes:

AIR BAGS: FRONTAL

THREADED INFLATOR COMPONENTS MAY HAVE BEEN DAMAGED DURING ASSEMBLY WHICH MAY ALLOW COMPONENTS TO SEPARATE WHEN INFLATOR RECEIVES A SIGNAL TO DEPLOY THE AIR BAG.

Número de llamada a revisión:

06E026000

Fecha de retirada:

2006-03-23

Componentes:

EXTERIOR LIGHTING

CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.