Vérification de rappel BUICK LESABRE

N° de rappel :

81V037000

Date du rappel :

1981-04-08

Composant(s) :

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES/PIPING, AND FITTINGS

THE POWER BRAKE VACUUM HOSES MAY FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 106, "BRAKE HOSES". THE MATERIAL USED IN THE HOSES WILL NOT PERFORM ACCORDING TO SPECIFICATIONS. THE PURPOSE OF THIS REGULATION IS STATED AS, "TO REDUCE DEATH AND INJURIES OCCURRING AS A RESULT OF BRAKE SYSTEM FAILURE FROM PRESSURE OR VACUUM LOSS DUE TO HOSE ASSEMBLY RUPTURE".

N° de rappel :

80V125000

Date du rappel :

1980-12-10

Composant(s) :

SERVICE BRAKES, HYDRAULIC: PEDALS AND LINKAGES

THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH A BRAKE PEDAL SUPPORT BRACKET WHICH WAS DESIGNED FOR USE IN DIESEL ENGINE VEHICLES. THE INCORRECT BRACKET MAY CAUSE THE SERVICE BRAKES TO REMAIN PARTIALLY APPLIED, RESULTING IN BRAKE OVERHEATING AND REDUCED BRAKING EFFECTIVENESS.

N° de rappel :

83V077000

Date du rappel :

1983-09-06

Composant(s) :

VEHICLE SPEED CONTROL: CABLES

ACCELERATOR PUMP LEVER RETAINING PIN MAY LOOSEN AFTER REPEATED HEAVY ACCELERATOR PEDAL APPLICATIONS. THIS COULD CAUSE THE THROTTLE TO BECOME STUCK IN THE OPEN POSITION.

N° de rappel :

79V247000

Date du rappel :

1980-02-05

Composant(s) :

SEAT BELTS: FRONT: ANCHORAGE

THE HEADS MAY BREAK OFF THE FRONT OUTBOARD SEAT BELT ANCHOR BOLTS DURING NORMAL VEHICLE OPERATION EVEN UNDER NO LOAD CONDITIONS. THIS IS DUE TO THE COMBINATION OF BOLTS USED, HIGH INSTALLATION TORQUE AND ARRANGEMENT OF THE BODY ANCHORAGE.

N° de rappel :

79V142000

Date du rappel :

1979-10-12

Composant(s) :

EXTERIOR LIGHTING: BRAKE LIGHTS: SWITCH

ON THE INVOLVED VEHICLES THE BRAKE STOPLIGHT AND CRUISE CONTROL SWITCH WHICH IS OPERATED BY THE BRAKE PEDAL MAY HAVE BEEN ASSEMBLED WITH AN INCORRECT LUBRICANT ON THE ACTUATING PLUNGER. THIS CAN CAUSE THE REAR BRAKE STOPLIGHTS TO BECOME INOPERATIVE AND THE CRUISE CONTROL, IF ACTIVATED, TO STAY ELECTRICALLY ENGAGED.

N° de rappel :

78V139000

Date du rappel :

1979-10-12

Composant(s) :

ENGINE AND ENGINE COOLING: COOLING SYSTEM: FAN

THE HUB PORTION OF THE FAN BLADE ASSEMBLY COULD CRACK DUE TO HIGH STRESS LEVELS GENERATED DURING ENGINE OPERATING CONDITIONS. EVENTUALLY, THE BLADE COULD BREAK APART AT THE HUB AND BLADE PIECES COULD BE PROPELLED INTO THE ENGINE. IF THE HOOD IS OPEN WHILE THE ENGINE IS RUNNING, THE FRAGMENTS WOULD BE FREE TO FLY FROM THE VEHICLE.

N° de rappel :

77V200000

Date du rappel :

1979-10-12

Composant(s) :

WHEELS: LUGS/NUTS/BOLTS/STUDS

THE REAR WHEEL MOUNTING BOLTS ON THE AFFECTED VEHICLES, ARE BRITTLE AND THEREFORE MAY FRACTURE. THIS BRITTLENESS IS DUE TO IMPROPER HEAT TREATMENT DURING MANUFACTURE. IF THE BOLTS BREAK, THE TIRE AND WHEEL ASSEMBLY MAY SEPARATE FROM THE VEHICLE.

N° de rappel :

07E088000

Date du rappel :

2007-10-30

Composant(s) :

EQUIPMENT

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

N° de rappel :

77V012000

Date du rappel :

1979-10-12

Composant(s) :

STEERING: LINKAGES

ON THE INVOLVED VEHICLES, THE COTTER PIN MAY HAVE BEEN OMITTED AND THE RETAINING NUT IMPROPERLY SECURED. CONSEQUENTLY, THE STEERING LINKAGE COULD DETACH FROM THE PITMAN ARM.

N° de rappel :

76V132000

Date du rappel :

1979-10-12

Composant(s) :

STEERING: STEERING WHEEL/HANDLE BAR