¿Dónde el VIN?
•
Sin VIN?
Obtenga reportes de EpicVIN
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL MAY SLIP OUT OF PLACE, CAUSING INTERMITTENT AND UNEXPECTED INCREASES IN ENGINE SPEED OR DIESELING (ENGINE RUN ON WITH IGNITION OFF).
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
A SMALL NYLON BUSHING IN THE CRUISE CONTROL SERVO BAIL MAY SLIP OUT OF PLACE, CAUSING INTERMITTENT AND UNEXPECTED INCREASES IN ENGINE SPEED OR DIESELING (ENGINE RUN ON WITH IGNITION OFF).
CERTAIN REPLACEMENT FUEL FILTERS, FRAM BRAND NAME P/N G3727, WITH DATE CODES X52911 THROUGH X60801 SEQUENTIALLY OR X600141 AND A MEXICO COUNTRY OR ORIGIN MARKING ON THE FUEL FILTER HOUSING MANUFACTURED FROM OCTOBER 18, 2005, THROUGH MARCH 21, 2006, SOLD FOR USE ON THE VEHICLES LISTED ABOVE AND ON CERTAIN SCHOOL BUSES. (TO SEE THE SCHOOL BUS ENGINE SIZES, CLICK ON "DOCUMENT SEARCH" AND THEN "BUS APPLICATIONS"). THE CONNECTOR ON THE FUEL FILTER WAS NOT MANUFACTURED TO HONEYWELL'S SPECIFICATION. AS A RESULT, THE O-RING MAY NOT SEAT CORRECTLY ON THE FUEL LINE.
DURING WINDSHIELD WIPER OPERATION, THE NOISE SUPPRESION CAPACITOR IN THE WIPER MOTOR RELAY MAY OVERHEAT.
UNDER CERTAIN VEHICLE OPERATING CONDITIONS, THE GOVERNOR WEIGHT RETAINER IN THE INJECTION PUMP MAY FAIL. THE THROTTLE VALVE COULD STICK, PREVENTING RETURN TO IDLE AND SHUT DOWN OF THE ENGINE BY THE DRIVER.
THE FRONT LEFT UPPER CONTROL ARM NUTS MAY NOT HAVE BEEN SECURELY TIGHTENED. THE NUTS MAY LOOSEN AND COME OFF AND WITH CONTINUED DRIVING THE CONTROL ARM FRONT BOLT MAY WORK ITS WAY OUT OF POSITION OR BECOME DISPLACED.
THE INVOLVED VEHICLES MAY HAVE BEEN ASSEMBLED WITH CLEAR LAMP BULBS INSTEAD OF THE CORRECT AMBER COLORED BULBS. AS A RESULT, THESE VEHICLES DO NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES AND ASSOCIATED EQUIPMENT", WHICH REQUIRES THAT THE FRONT SIDE MARKER LAMPS BE AMBER WHEN ILLUMINATED.
VEHICLES FAIL TO COMPLY WITH FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 105, "HYDRAULIC BRAKE SYSTEMS". AN INCORRECT PARKING BRAKE ADJUSTING SPRING WAS INSTALLED ON CERTAIN VEHICLES. THIS MAY CAUSE INTERFERENCE WHEN ATTEMPTING TO APPLY THE PARKING BRAKES.
THE HUB PORTION OF THE FAN BLADE ASSEMBLY COULD CRACK DUE TO HIGH STRESS LEVELS GENERATED DURING ENGINE OPERATING CONDITIONS. EVENTUALLY, THE BLADE COULD BREAK APART AT THE HUB AND BLADE PIECES COULD BE PROPELLED INTO THE ENGINE. IF THE HOOD IS OPEN WHILE THE ENGINE IS RUNNING, THE FRAGMENTS WOULD BE FREE TO FLY FROM THE VEHICLE.
Descubra consejos de expertos, sugerencias y noticias sobre la compra y el mantenimiento de vehículos usados.
Echa un vistazo a estos consejos útiles que te ayudarán a prolongar la vida út...
Lea mas
Nuestro artículo le dirá en detalle dónde puede encontrar el VIN del vehículo.
Lea mas
Estos son los descapotables de cuatro plazas más vendidos en 2023.
Lea mas