CHEVROLET Recall Check

N° de rappel :

80V132000

Date du rappel :

1980-11-12

Composant(s) :

EQUIPMENT: OTHER: LABELS

VEHICLES MAY NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS". THE TIRE RIM SIZE WAS OMITTED ON THE EXISTING LABEL.

N° de rappel :

80V132000

Date du rappel :

1980-11-12

Composant(s) :

EQUIPMENT: OTHER: LABELS

VEHICLES MAY NOT CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS". THE TIRE RIM SIZE WAS OMITTED ON THE EXISTING LABEL.

N° de rappel :

81V025000

Date du rappel :

1981-03-06

Composant(s) :

SUSPENSION: REAR

THE BOLTS THAT ATTACH THE LOWER REAR CONTROL ARM TO THE FRAME MAY FRACTURE. THE REAR CONTROL ARM SUPPORTS AND POSITIONS THE REAR AXLE. FRACTURE OF THE BOLTS WOULD ALLOW THE CONTROL ARM TO DROP FREE.

N° de rappel :

79V073000

Date du rappel :

1979-10-12

Composant(s) :

SEATS

VEHICLES DO NOT COMPLY TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 207, "ANCHORAGE OF SEATS". THE LOCK BAR IN THE FRONT SEAT ADJUSTER ASSEMBLIES MAY NOT ENGAGE PROPERLY AND THE ABILITY OF THE SEAT ADJUSTER TO MAINTAIN THE SEAT IN A LATCHED POSITION DURING AN ACCIDENT MAY BE REDUCED.

N° de rappel :

81V060000

Date du rappel :

1981-06-02

Composant(s) :

SEAT BELTS: FRONT: RETRACTOR

ON CERTAIN VEHICLES, THE SEAT BELT RETRACTORS IN THE REAR SEATING POSITIONS CONTAIN FIRST LOCK POSITIONS WHICH WILL NOT LOCK WHEN USED BY SMALLER PASSENGERS. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION".

N° de rappel :

81V060000

Date du rappel :

1981-06-02

Composant(s) :

SEAT BELTS: FRONT: RETRACTOR

ON CERTAIN VEHICLES, THE SEAT BELT RETRACTORS IN THE REAR SEATING POSITIONS CONTAIN FIRST LOCK POSITIONS WHICH WILL NOT LOCK WHEN USED BY SMALLER PASSENGERS. THIS FAILS TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 208, "OCCUPANT CRASH PROTECTION".

N° de rappel :

07E088000

Date du rappel :

2007-10-30

Composant(s) :

EQUIPMENT

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.

N° de rappel :

80V135000

Date du rappel :

1980-12-09

Composant(s) :

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES/PIPING, AND FITTINGS

THE INVOLVED VEHICLES MAY HAVE INSUFFICIENT CLEARANCE BETWEEN THE FRONT BRAKE PIPE AND THE ENGINE OIL PAN. THIS CONDITION COULD CAUSE THE BRAKE PIPE TO CONTACT THE LEFT HAND FRONT EDGE OF THE OIL PAN, RESULTING IN WEAR AND, EVENTUALLY, DAMAGE TO THE BRAKE PIPE. THIS COULD LEAD TO A LOSS OF BRAKE FLUID AND SUBSEQUENT LOSS OF BRAKES.

N° de rappel :

80V135000

Date du rappel :

1980-12-09

Composant(s) :

SERVICE BRAKES, HYDRAULIC: FOUNDATION COMPONENTS: HOSES, LINES/PIPING, AND FITTINGS

THE INVOLVED VEHICLES MAY HAVE INSUFFICIENT CLEARANCE BETWEEN THE FRONT BRAKE PIPE AND THE ENGINE OIL PAN. THIS CONDITION COULD CAUSE THE BRAKE PIPE TO CONTACT THE LEFT HAND FRONT EDGE OF THE OIL PAN, RESULTING IN WEAR AND, EVENTUALLY, DAMAGE TO THE BRAKE PIPE. THIS COULD LEAD TO A LOSS OF BRAKE FLUID AND SUBSEQUENT LOSS OF BRAKES.

N° de rappel :

07E088000

Date du rappel :

2007-10-30

Composant(s) :

EQUIPMENT

CERTAIN HONEYWELL FRAM RACING BRAND HP4 AND HP8 OIL FILTERS THAT WERE MANUFACTURED FROM MAY 25, 2006, THROUGH SEPTEMBER 14, 2007, AND SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR VEHICLES LIST ABOVE. THE AFFECTED FILTERS ARE MARKED WITH A DATE CODE A61451 THROUGH A72571 SEQUENTIALLY. THE DATE CODE AND PART NUMBER APPEAR ON THE FILTER HOUSING. FRAM RACING HP4 AND HP8 OIL FILTERS NOT BEARING A DATE CODE IN THIS RANGE ARE NOT AFFECTED BY THIS RECALL. THE GASKET OF THE OIL FILTER BECOMES MORE PLIABLE UNDER HIGH TEMPERATURES AND PRESSURES.