Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
21463 views
6 answers
As per the manual for a 2013 Ford Focus, it's recommended to have the transmission fluid level checked by an authorized dealer or certified technician each time the oil is changed. Since this model lacks a transmission fluid dipstick, the level should be monitored through the fill hole. The car needs to be parked on a flat surface and the front driver side tire must be taken off. The fill hole plug can be found just above the driver side CV axle shaft, slightly behind the subframe when viewed from the wheel well. An effective way to remove it is by using an 8-millimeter Allen key on a swivel extension. The fluid level should be even with the bottom of the threads on the fill hole.
How can transmission fluid be added to a 2013 Ford Focus?
Can you tell me where I can locate the transmission check valve on a 2013 Ford Focus?
To inspect the transmission fluid in a 2013 Ford Focus, all you need to do is utilize the check valve situated at the underside of the car.
The best place to inspect the transmission fluid in a 2013 Ford Focus is the transmission check valve located on the transmission housing. You can only access this valve when the car is on a level surface.
To include extra oil in this transmission, you will require a torx bit instead of an allen key bit, as previously mentioned.