Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
4198 views
4 answers
The lug nuts for a 2013 Dodge Dart are 19 millimeters in size and have M12 X1.25 threads. The wheel bolt pattern is 5 by 110 millimeters, with each wheel requiring five lug nuts. Make sure to install the new lug nuts with the tapered end facing towards the rim to avoid potential wheel damage or detachment. It is recommended to hand-tighten the bolts initially, then tighten them in a crisscross pattern until snug before using a torque wrench to tighten them to 95 foot-pounds.
The 2013 Dodge Dart requires a 19 mm socket for the wheel lug nuts.
The 2013 1.4L Turbo Dart stock model comes with 19mm head M12X1.25 lug bolts, meant to be installed with the cone facing towards the wheel. If aftermarket wheels have been added, M12 lug studs may have been used on the wheel hub. The tightening procedure remains the same for both lug bolts and nuts, with torque specifications ranging from 85 to 115 foot-pounds. For alloy wheels with steel lug bolts, it is recommended to torque them to 100-105 foot-pounds.
The 2013 Dodge Dart comes with M12 x 1.25 lug bolts instead of nuts. These bolts must be installed with the cone facing into the wheel. However, if aftermarket wheels are used with lug studs in the wheel hubs, lug nuts will be needed as mentioned before.