Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
Could you please provide instructions on how to reset the TPMS for a 2018 Ford Fusion?
1869 views
3 answers
★ Top Answer
To reset the TPMS on your 2018 Ford Fusion, first ensure the ignition is turned off and engage the parking brake for safety. Drive to a gas station and pull up next to the air pump. Inflate the tires to the recommended psi listed on your placard. Next, drive the car for at least 2 minutes at a speed of 20 mph or more. Finally, park the car, turn off the ignition, and your TPMS should now be reset.
More answers
-
Turn off the car entirely. Inflate all tires to the correct pressure. Take a drive on the highway for a few minutes, then check the tire pressure again. If it's still correct, press and hold the button next to the steering wheel for 5 seconds.
-
To recalibrate the TPMS on the 2018 Ford Fusion, first ensure the tire pressure is accurate and start the car. Locate and press the reset button located on the right side of the steering wheel, then wait for ten minutes. If needed, hold down the button until the light flashes. If the sensor malfunctions, it could be due to incorrect tire pressure, leading to poor car performance.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
