Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
8393 views
2 answers
Adding coolant to your Jeep Wrangler is a simple task that should only take a few minutes. To start, open the hood by releasing the external hood latches, sliding the center hood latch lock to the right, and lifting the hood up while setting the prop rod in place. Locate the coolant reserve tank, situated at the front of the engine compartment to the left of the upper radiator hose. The tank has marked indicators for cold and hot fill levels on the left side. Lift the yellow cap to access the tank opening. When adding coolant, consider the temperature of the engine: if the Wrangler has been recently driven, fill it to the hot fill line, while if it has been idle for over an hour and a half, aim for the cold fill line. It is recommended to use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT that complies with FCA Material Standard MS.90032 for optimal performance.
To replenish coolant in a Jeep Wrangler, make sure the car has cooled down before pouring it in through the radiator cap.