Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
3190 views
4 answers
To reset the oil life on a 2013 Ford Edge, start by turning the key to the ON position without starting the engine. Then, press the trip/reset button until you see OIL LIFE = X% HOLD RESET message appear. Press the trip/reset button again, but this time hold it down until the display shows OIL LIFE SET TO 100%. Release the button, turn the ignition to OFF, and start the engine to confirm that the reset was successful. If your vehicle has steering wheel controls, follow the same steps with the key turned to ON. For vehicles with an ignition button, press it twice without pressing the brake pedal like you would when starting the engine. Use the arrow controls on the left side of the steering wheel to navigate to SETTINGS, then find the VEHICLE menu and select it. Look for and choose OIL LIFE RESET, then hold down the OK button until the oil life is adjusted to 100%.
For a 2013 Ford Edge, to set the oil indicator back to 100%, first, turn the ignition to the "on" position. Use the steering wheel's directional pad to navigate to "Settings>Convenience>Oil Life Reset." Choose your desired percentage and press ok. Hold down the Ok button to confirm your choice. After that, turn off the ignition and start the car.
To reset the oil indicator light on a 2013 Ford Edge, you can do the following steps: Start the car by turning the ignition to the "on" position, then navigate to "settings > vehicle > oil life reset" using the controls on the steering wheel. Hold down the "ok" button until it shows 100%. After that, turn off the ignition and start the car again.
As an American, to clear the oil indicator light on a 2013 Ford Edge, you can do the following: Turn the ignition to the "on" position, use the directional pad on the steering wheel to navigate to "settings > vehicle > oil life reset." Press and hold the "ok" button until it shows 100%. After that, turn off the ignition and start the car.