Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I fully remove the door panel on a Chevy Spark?
1589 views
3 answers
★ Top Answer
To take off the inner door panel of your Chevrolet Spark in the US, start by taking out the armrest. To do this, unscrew the visible screws. Once that's done, you can access the other screws that hold the panel to the metal door. After removing these screws, you'll deal with the clips. Use a flat tool, such as a flathead screwdriver or a small pry bar, to gently separate the panel from the metal door frame. Be cautious not to damage the plastic as you repeat this process from various angles. Once the panel is loosened, you'll disconnect the window electrics (or the window crank if your Spark doesn't have power windows). The inner panel should then be ready to remove.
More answers
-
To take off the door panel on a Chevy Spark, you have to unscrew the panel and carefully pry it away from the door.
-
Two screws are located at the center of the armrest and door handle pull respectively. After removing them, use a small pry tool to release the retainers along the right, left, and bottom edges of the door. It is recommended to start with the bottom left side for the driver's door or the corresponding side for the passenger front door. Lift off the top of the door, disconnect any electrical connectors, and reattach any retainers that were left on the door panel.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
