Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
645 views
2 answers
To perform an oil change on a 2019 Ford Fiesta, start by ensuring the engine is warm but not overly hot. If the car has been in use, it may need to cool down a bit before beginning. Conversely, if the engine is cold, let it idle for a few minutes to warm up. Unscrew the cap located at the top of the oil reservoir and find the drain plug on the oil pan. Loosen the drain plug to allow the oil to completely drain out. While the plug is still out, replace the oil filter following detailed guidance available online. Once done, reinstall the drain plug and refill the oil reservoir with 4.3 quarts of SAE 5W-20 full synthetic motor oil.
To start an oil change on a 2019 Ford Fiesta, first have the car running and then switch off the engine. Once the engine is warm, unscrew the oil reservoir cap and loosen the drain plug located underneath the vehicle's oil pan. Let the oil flow out into a container until there is no more left. Tighten the drain plug, add around 3.5-4 quarts of 5w-20 oil, and finally close the reservoir cap.