Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I go about resetting the oil life indicator on my 2010 Honda Accord?
7283 views
4 answers
★ Top Answer
In a Honda Accord, the oil life display is designed to alert you when your oil is running low on protection. The display calculates this based on both mileage and time since your last oil change. If Honda performs the service, they will reset the counter for you. However, if you do the oil change yourself, you can reset the oil life indicator by following these steps. First, turn the ignition on without starting the engine. Then, press the Select/Reset button until the engine oil life indicator appears. Hold the button for 10 seconds or more until the indicator and maintenance code start blinking. Keep holding the button for an additional 5 seconds until the maintenance code disappears and the oil life resets to 0. Finally, turn off the ignition and start the car to confirm that the counter has been reset.
More answers
-
Avoid working.
-
To clear the oil life indicator on a 2010 Honda Accord, first turn the ignition to the on position. Next, press and keep holding the reset or select button for ten seconds. After that, let go and hold it again for five seconds.
-
Worked for me - I held the button until the light started flashing, then released it and held it again for 7 to 8 seconds. Reset is now done.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
