Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I initiate a reset for the automatic transmission on my BMW e46?
12856 views
7 answers
★ Top Answer
To reset the transmission on a BMW E46 in the United States, first turn off the vehicle and remove the key. If you have a traditional blade key, insert it into the ignition and turn it to the second position without starting the car. For those with a key fob, insert it and press the Start Stop button without starting the car, making sure your foot is not on the brake. All dashboard lights will illuminate, at which point press and hold the accelerator pedal all the way down for 30 seconds. Release the pedal after 30 seconds, press the Start Stop button again, and remove the key. Finally, open and close the driver's door. This process will reset the transmission.
More answers
-
To recalibrate the BMW e46 transmission, first, turn the ignition on without pressing the brake pedal to prevent the engine from starting. Next, press the accelerator all the way down for 15 seconds. After that, release the accelerator, turn the car off, start the engine, and begin driving.
-
Do not engage the emergency brake before switching off the car. First, turn the key to the second position and then switch the car off. After that, release the emergency brake and start the car again.
-
Do not immediately shut off the engine; let it run for 60 seconds before turning it off.
-
Chris' suggestion to engage the emergency brake, switch off the car, turn the key to the second position, switch the car off again, release the emergency brake, and then start the car was effective for me.
-
My dashboard is indicating that the gearbox light is still on.
-
Hello, I've installed a fifth gearbox, but the gearbox indicator is still on, and the gear changes are slow.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
