Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I recalibrate the air suspension system on my Mercedes-Benz W211?
17220 views
9 answers
★ Top Answer
If the air suspension system in your Mercedes W211 is malfunctioning, consider resetting it by disconnecting both the positive and negative battery cables from the battery and connecting them together. Leave them connected for about ten minutes to completely power down the system. Reconnect the cables and restart your vehicle. This process should help the air suspension to restart and function properly. Check the compressor and lines for any leaks if the issue persists.
More answers
-
Why is my Airmatic suspension remaining elevated and extremely rigid?
-
Which battery should I disconnect - the one in the back or the one in the front?
-
Are you serious? 😂😂😂😂 You're a troublemaker, aren't you?
-
My air suspension wasn't functioning properly, so I attempted to disconnect the battery. However, my cables were not long enough to reach, so I kept them disconnected for around 15 minutes. This fix restored the self-leveling system, and it is now operating as it should.
-
Does the 2007 S500 come with dual batteries?
-
There is no activity going on.
-
Hello, I recently replaced the front struts on my S550. Everything seemed to be working fine, but I noticed that overnight there is a gradual loss of air specifically in the front.
-
Hey Mark Gaska, I encountered a similar issue. I discovered that the problem was due to mismatched air hose seals located at the top of the struts. The new struts had slightly deeper holes there, causing the original seals to not seal properly. I resolved this by removing the old brass seals from the hose and replacing them with new ones. This fixed the problem.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
