Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I recalibrate the tire pressure monitor on my 2018 Ford Escape?
7326 views
3 answers
★ Top Answer
To reset the tire pressure sensor on a 2018 Ford Escape, first ensure you are parked safely and that the tires are properly inflated. The recommended tire pressure is 36 psi for the 235/45R19 tires on both the front and rear, and 35 psi for the 235/50R18 and 235/55R17 tires on both the front and rear. Once parked and the tire pressure is correct, step on the brake pedal, release it, then quickly turn the ignition key on and off three times, leaving it in the on position after the third turn. Hold the brake pedal for 2 seconds, release it, then switch the key to the off position, wait for 1 second, and repeat the on and off sequence three times quickly.
More answers
-
To clear the low tire pressure indicator on a 2018 Ford Escape, start by turning off the engine. Step on the brake pedal and let go. Toggle the ignition off and on three times, finishing in the on position. Next, press the brake pedal for 2 seconds and release it. Repeat the process of turning the ignition off and on three times.
-
That was a complicated way to do it. The 2015 getaway just happened after driving a mile or two.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
