Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
1755 views
2 answers
To replace the front wheel bearing on the Ford F-150 4x4, there are several steps involved. First, you need to raise the truck and take off the tires. Next, loosen the caliper and remove it from the brake line, followed by detaching the brake line from the wheel. Remove the wheel bearing disk to reveal the hub underneath. Unbolt the hub from the spindle and take it off. This will allow you to access the bearing, which also needs to be unbolted and removed. After that, you can replace them with new bearings.
To begin, find a level spot to park your vehicle. Place wheel chocks under the tires that won't be receiving attention. Loosen the lug nuts in an anti-clockwise direction and elevate the wheel with a jack. Proceed to remove the lug nuts and take off the wheel, followed by detaching the brake caliper. Subsequently, eliminate the dust cover, cotter pin, and castle nut. Remove the rotor, and then unfasten the hub bolts to take out the old hub. Disassemble the hub assembly, remove the races, clean the knuckle, and install new races and bearings. Lastly, reverse these actions to complete the process.