Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I reset the anti-theft system on a 2000 Ford Excursion?
6055 views
3 answers
★ Top Answer
To reset the anti-theft system on your 2000 Ford Excursion, start by inserting the key into the ignition and turning it to the ON position without starting the engine. After about 30 to 60 seconds, the theft light will disappear. Then, turn the car off and remove the key from the ignition for one minute. Reinsert the key, turn it to the ON position one more time, and the theft system should now be disabled, allowing you to use your vehicle normally.
More answers
-
To reprogram the anti-theft key for a 2000 Ford Excursion in the USA, you need to perform the following steps:
1. Insert the first programmed key into the ignition and turn it to the "on" position.
2. Quickly remove the first key and insert the second programmed key within 5 seconds.
3. Turn the second key to the "on" position and then back to "off."
4. Insert the key you want to program within 10 seconds and leave it in the "on" position for one second before turning it back to "off."
5. Keep the key in the ignition until the security light comes on, and then remove the key to finish the programming process. -
This accomplishes absolutely zero.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
