Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
49928 views
26 answers
If your Subaru's immobilizer system has locked you out, there are several methods to get your vehicle running again depending on the specific model. The first simple approach is to hold down the panic button on your key fob for 5 seconds, then press the lock button twice. Another method is to quickly turn the key in the ignition cylinder three times and then attempt to start the car on the fourth turn. Typically, one of these techniques will work, depending on the model year of your Subaru. If you consistently face issues with your alarm system, it's advisable to reach out to a Subaru service center to ensure that there are no problems with the alarm's computer.
To deactivate the immobilizer in a Subaru, press and hold the panic button for 2 to 5 seconds, and then press the lock button twice.
I've got a 2007 Subaru that's been sitting locked up for more than half a year! I took it to the dealership first, and they kept it for three months without being able to solve the problem. When I try to start it, the security light comes on after 4 seconds and it won't drive! What should I do next?
I couldn't get the job done on the 2019 Outback.
Was unsuccessful with my Subaru Legacy.
Failed to function on the 2021 Subaru Ascent.
I have a 1995 Subaru Legacy that cranks but does not spark, even after I replaced the crank sensor and battery. Also, the security light is flashing rapidly. Could the security light be related to the issue?
I didn't have success with the 2022 Forestee project.
The 2016 Subaru Forester had issues and was not functioning properly.
This won't be effective for a 2009 Impreza WRX.
As helpful as using a wet cloth to clean yourself three times and then flushing it down the toilet. That way, if your car won't start, you can shift your attention to unclogging the toilet.
Unfortunately, it didn't function properly on the 2015 Outback.
I changed the door of my 2016 Subaru Impreza, and now the locks make a clicking sound and the windows are not functioning. Is there an easy solution to this issue that I haven't figured out yet? Please help, it's starting to get warm and I really need my windows to work properly.
Unable to function on a 2013 Crosstrek model.
This is ineffective.
It didn't work for me either with my 2011 Outback.
The 2017 Subaru Outback did not respond to the attempt to fix it.
The 2014 Outback is not available anymore.
The 2018 Outback was not operational.
I had the experience of working with the 57 license plate Forester.
With my 2017 Subaru Forester XT, I had to remove the key from the key fob to manually unlock the driver's door. As I did this, the panic alarm went off. After hitting the lock button while the door was open, the power locks reset. The passenger side also would not unlock prior to this. It all started functioning properly again. I suspect that someone might have tried to mess with my car and then gave up. But it also seems like the electronics in the vehicle can be a bit finicky; for example, the power lift gate needs to be pressed on the fob for longer than a couple of seconds, or else it malfunctions and requires resetting.
It was successful with the 2011 Subaru Legacy.
I drive a Subaru Crosstrek from 2018.
Was not successful with the 2017 Outback.
My 2015 Legacy did not function correctly.
Failed to function.