Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
2014 views
3 answers
Your 2018 Ford EcoSport has a change oil light that indicates when it is time to replace the oil and filter. This reminder will appear approximately every 7,500-10,000 miles or 12 months, whichever comes first. If you have a Ford or an authorized service center perform the service, they will reset the light for you. However, if you decide to do the oil change yourself, you will need to follow these steps to ensure that the system accurately tracks the mileage and time of your current oil. Begin by turning on the ignition without starting the engine. Then, with the ignition on, press both the brake and gas pedals fully at the same time. Keep both pedals depressed for about 3 seconds until a message indicates that the reset is in progress. Once the message confirms that the process is complete, you can release the pedals and switch off the ignition.
Nope. Activate the engine, navigate the smart buttons located on the left side of the steering wheel to select the car icon. Press the corresponding right smart button, proceed by tapping okay for information, and the oil life status will be displayed. Press okay once more to reset the oil life indicator. Keep holding down the button until the reset is complete. Finished.
To begin, start by turning the ignition to the second position. If there is a start button, press and hold it for two seconds. Then, for the next twenty seconds, press both the accelerator and brake pedals at the same time. Keep holding them until you see the message "service: oil reset in progress" on the instrument display. Maintain pressure on both pedals until the message changes to "service: oil reset complete.