Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I reset the oil change indicator on a 2018 Mercedes-Benz GLE-Class?
5599 views
3 answers
★ Top Answer
To reset the oil change alert in your 2018 Mercedes Benz GLE, follow these steps: With the ignition key at position 1 or if your car has a push-start button, press it without pressing the brake pedal. Ensure that the vehicle trip mileage is visible on the display. Use the navigation button to access the menu. Press and hold the "ACCEPT CALL" button for a second and then simultaneously press and hold the OK button. After a few seconds, the vehicle data menu should appear. Scroll down to find the ASSYST PLUS menu, then select it. Scroll further to locate the FULL SERVICE option. Choose CONFIRM SERVICE and select the correct OIL GRADE in use. When a confirmation prompt appears, choose YES to confirm it.
More answers
-
To begin, turn the ignition to step 1. Then, press the start/stop button quickly without fully turning on the ignition. Make sure the trip meter is displayed. Next, hold down the ok and phone buttons for about 3 seconds until the assist plus menu appears. Scroll to assyst plus and press ok to confirm. If prompted, turn on the ignition by pressing the start button again. Scroll to full service, press ok, confirm service, then scroll to yes and press ok for confirmation. The reset should be complete.
-
To start your car, if you have a smart start feature, press the start button without stepping on the brake. Next, press the system selection button until you find the menu option labeled "Trip" highlighted, then press OK within 5 seconds. Hold down the accept call button for one second, and while holding it, press the OK button to access the service menu. Scroll to choose "Assist Plus," then switch the ignition to the on position. Select "Full Service," confirm the service, and choose the correct oil grade. Confirm by selecting "Yes." Turn off the ignition, then start the engine to ensure it has been reset.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
