Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I reset the oil change reminder on a 2018 Ford Edge?
1209 views
3 answers
★ Top Answer
To reset the oil change light on a 2018 Ford Edge, you just need to press the oil life button until the light turns off. However, if you actually need an oil change, the light will come back on. When changing the oil in the car, ensure the vehicle has been turned off and parked for a couple of hours to allow the oil to cool down to prevent burns. Locate the oil pan and drain plug under the engine, place a bucket under the plug, and remove it to drain the oil into the pan. Let it drain completely, which may take about an hour. Once drained, replace the plug, then find the intake port on top of the oil pan. Use a funnel to fill the pan with oil to the full mark, being careful not to overfill. It's better to be slightly under than over, as overfilling can cause leaks and oil burning. Close the port, clean up any spilled oil, and you're done.
More answers
-
To reset the change oil light on a 2018 Ford Edge, you can do so by turning the ignition to the on position without starting the engine. Then, use the directional pad on the steering wheel to navigate to the "settings" option and press enter. Locate the "vehicle" option and select it, then find the "oil life reset" button and select it. Hold down the "ok" button until it resets to 100%. Finally, turn the ignition off.
-
Please press the button on the left side of your steering wheel. Navigate to the OIL option on the instrument cluster and press and hold the OK button to reset it.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
