Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
9909 views
3 answers
To reset the oil change indicator on the 2018 Toyota 4Runner, you only need to follow a few simple steps. First, ensure the ignition is in the on or accessory position. Check that "Trip A" is showing on the driver information display; if not, press the odometer button until it appears. Then, turn off the 4Runner completely. Press the odometer button and simultaneously switch the car to on or accessory mode. Continue pressing the odometer button until the display reads either 000000 or complete. Remember to perform this reset each time you change the oil. It's recommended to change the oil and filter every 3,000 to 5,000 miles in the 4Runner.
To clear the maintenance light on a 2018 Toyota 4Runner, start by switching the car to accessory mode. Then, use the odometer button to navigate to trip a. After selecting trip a, turn off the vehicle and press and hold the odometer button while switching back to accessory mode. This action will clear the maintenance data. Once the screen resets, you can safely turn off the vehicle.
To begin, switch off the ignition and press and hold the reset button for the trip odometer. Next, turn the ignition to the on position. Keep holding the trip odometer reset button until the display shows 00000 miles and the maintenance light goes out.