Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How can I reset the oil life indicator on my 2017 Jeep Wrangler?
18025 views
4 answers
★ Top Answer
To reset the oil life on the 2017 Jeep Wrangler, you have two options. First, turn the ignition to ON without starting the engine. In the first method, go to "Vehicle Info" on the display using the steering wheel controls, then select "Oil Life". When it shows 100 percent, press the OK button. In the second method, press the accelerator three times within ten seconds. Turn the ignition OFF. You may need to try this method a few times to clear the oil life message. Your oil and filter should be changed every 3,000 to 5,000 miles based on your driving. You will need 5.9 quarts of SAE 5W-20 full synthetic oil.
More answers
-
To reset the oil indicator on your 2017 Jeep Wrangler, first turn the key to the on position. Next, gently press the accelerator three times within 10 seconds. Finally, turn the ignition off.
-
The accelerator functioned flawlessly on three separate occasions.
-
Switch on the ignition (but don't start the engine), gently press the gas pedal three times, and then turn off the ignition. This should reset the oil life to 100%.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
