Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
48831 views
20 answers
After replacing the battery in your Honda CR-V, you can reset it with these simple steps: Start by turning on the radio with the power button, then let it stay on for a minute. Next, turn off the radio using the power button, but keep holding it down for around 30 seconds to a minute. Turn the radio back on and wait without pressing any buttons for a few minutes as it resets. It may take a bit of time for the radio to reset completely. After about 5 minutes, you can use the radio as you normally would.
I require the radio identification number.
Hey, try out this code 36542 and see if it works for you. It worked for me, so good luck!
Switch on the radio by pushing the volume knob. Wait 10 seconds, then switch off the radio. Hold down the power button for two to five seconds and observe the radio screen.
The code 36542 was ineffective.
Once you've finished charging the battery in the Honda CRV, you can switch on the radio by pressing the volume control knob. After about 10 seconds, switch the radio off. Next, press and hold the power button for two to five seconds and observe the radio display.
You can get the code from this website: https://radio-navicode.honda.com/. Alternatively, for newer models, check inside the glove box for a sticker with the 5-digit code.
Unable to locate serial number using any method.
I've attempted multiple times to reset the radio in our 2006 CRV. Following the instructions, I got the device's serial number and retrieved the code from the website. My concern is where and how do I input this code to reset the radio? I even tried switching off the device and holding the power button for a minute, but that didn't work either. After all my tinkering, I now see an "error 7" on the display, haha.
Press and hold both the number 1 and number 6 buttons simultaneously. While keeping these two buttons pressed, also press the power button until an 8-digit code appears. Enter this code to make your radio function. The 5-digit code in my glove box did not work, so I found this solution on YouTube. However, my issue now is that the radio won't stay on.
Simply driving a short distance will reset. It is a quick and easy process.
Not currently employed.
Identifier for a 2008 Honda CRV is -14141.
It's effective for me, but I have to reset it each time I restart the car, and I'm unsure why it keeps happening.
My 2003 Honda CR-V's radio is displaying an "ERRE" error message and the manual suggests waiting an hour, but it's been days and I'm not sure how to resolve the issue.
To obtain the radio serial number for your CRV2008, press and hold the 1 and 6 buttons while turning on the radio. The serial number will display on the screen. Provide this number to your Honda dealer, and they will give you the code needed.
consider visiting this website: https://radio-navicode.honda.com/. You will require your Vehicle Identification Number (VIN) and Device Serial Number. To locate the Device Serial Number, simply press the info button and select system information. Look for the number following "device" on the display.
The code to remember is 3562.
I drive a 2015 Honda CRV LX. To start it, turn the key to the Accessory (second) position to turn on the dash lights. If the radio prompts for a code, press the power button to turn it off. Release the button for a moment, then hold it down for 2 or 3 seconds until the radio turns on. If you encounter any issues, check out this brief YouTube video: https://www.youtube.com/watch?v=SaW0AJY9qSI
Does not accept zip codes from Canada. Feeling frustrated.