Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
How do I go about replacing the battery in the key fob for a 2017 Ford Explorer?
1111 views
2 answers
★ Top Answer
To replace the battery in the key fob or transmitter of a 2017 Ford Explorer, start by separating the back and front sections of the fob. Turn the key over to find a small switch at the top of the plastic panel. Press down on the switch with your finger or a small flathead screwdriver to release it. Once the back of the fob is removed, you'll see a second panel with a metal back-up key. Use a coin or flathead screwdriver to remove this panel and access two 3-volt batteries. These CR2025 batteries can be found at most general retailers and are commonly used in watches and small devices. Use the flathead screwdriver to remove the old CR2025 batteries from the Explorer, then replace them with new ones. Finally, reassemble the key fob by following the steps in reverse order.
More answers
-
To replace the battery in the key fob for a 2017 Ford Explorer, you'll have to open the back cover. You can slide it off, but in some cases, you might need to unscrew it. After opening it up, take out the old battery and insert a new one. Close it back up, and you're done. The key fob uses a CR2025 battery, which typically costs around 5 to 6 dollars.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
