Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
1837 views
2 answers
To maintain a 2005 Ford Explorer's transmission, it is advised to replace the transmission fluid every 30,000 to 60,000 miles. Failing to do so may result in unusual noises and difficulty shifting gears. An aged torque converter can lead to complications as the transmission is a vital component of the vehicle. Problems such as rough shifting, shuddering, sticking gears, and jerking may occur if the transmission is not properly maintained. Any leaks in the transmission fluid should be promptly addressed to prevent further issues, such as delayed acceleration or slipping of the transmission.
To begin, raise the vehicle using ramps or a jack stand. Pop the hood by pulling the latch on the driver's side and then the hood latch under the hood. Locate the skid plate beneath the car, typically found in the middle. Undo all the screws and slide the skid plate forward to separate it. Place a container underneath to collect the oil during the next step. Loosen the drain plug, and once it's loosened, let the oil drain out. Allow the oil to completely drain before removing the plug. Rotate the oil filter counterclockwise to remove it, expect some oil to spill during this step. Thoroughly clean the engine's oil filter gasket surface. Prepare the new oil filter by filling it with oil and lubricating the gasket, then screw it in place. Use a funnel to introduce new oil into the engine, check the oil level using the dipstick, inspect under the car for any potential leaks, and reassemble everything back together.