Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
2098 views
3 answers
To replace the wiper motor on your Ford F-250, start by cleaning the front of the vehicle. Next, lift and take off the wiper blades. These are secured with a small latch that you need to release to remove them. Then, open the hood and locate the motors beneath where the wipers sit. The motors are typically found below the wipers towards the back of the engine near the firewall. Unbolt and disconnect them, and then you can proceed to install the new ones.
I purchased a new connector for the wiper motor because the old one was no good, but the wires do not have any color coding.
To replace the windshield wiper motor on a Ford F250, you need to follow these steps: First, remove the cowl and any covers protecting the wiper motor and transmission assembly. Then, unplug the harness connected to the motor and detach the wiper transmission arm from the motor. Next, unscrew the bolts securing the motor and transmission assembly to the car body. Install the new motor; ensure the plug harness is inserted correctly as it is usually designed to fit in one direction. Bolt the motor onto the car body. Turn the motor on and off a few times to set the park position, then re-connect the linkage transmission assembly to the wiper motor. Finally, put back all the covers and cowling and test the motor's operation on wet glass only.