Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
Steps for performing an oil change on a 2014 Ford Escape?
851 views
2 answers
★ Top Answer
To perform an oil change on a 2014 Ford Escape, you will first require specific tools, including a T30 screwdriver bit, 7mm hex socket, 15mm hex socket, oil funnel, oil filter band wrench, and a jack to lift the vehicle. Ensure to place the jack in a secure location to avoid damaging the body of the car. Subsequently, elevate the vehicle and locate the oil filter beneath the engine to remove and drain the old oil. After removing the filter, allow the oil to drain into a suitable container. Replace the oil filter with a new one, then refill the oil reservoir located at the top of the engine.
More answers
-
To perform an oil change on a 2014 Ford Escape, first use ramps or a jack to lift the vehicle. Open the car hood by releasing the latch on the driver's side, then find the skid plate beneath the car and remove it by taking out the screws. Place a container underneath to catch the draining oil. Loosen the drain plug bolts and let the oil drain completely before removing the plug. Next, unscrew the oil filter in a counterclockwise direction, cleaning the gasket surface thoroughly. Prepare the new oil filter by filling it with oil and lubricating the gasket before installing it. Pour the new oil into the engine, check the oil level using the dipstick, inspect for leaks under the car, and reassemble everything.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
