Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
2786 views
6 answers
If the radio buttons on your 2010 Ford Escape are not functioning, it's likely due to blown fuses. The vehicle has various fuses dedicated to electrical parts, which blow to protect them from power surges or other issues. To fix this, you'll need to identify the fuse linked to the radio buttons and replace it. If that doesn't work, try performing a hard reset by holding down the power button until the radio power cycles and resets. It's also possible a cable connected to the radio buttons may be loose or damaged, so it's worth checking that too.
I recently purchased a secondhand 2010 Escape. Unfortunately, the center dash radio didn't have any lights or functions, but the steering wheel controls were functional and had preset radio stations. It turned out that someone had swapped the radio box with a junkyard unit labeled "good," but they forgot to plug in the faceplate, which has its own power cord. Once I connected the faceplate, everything worked fine.
If the radio is on and the display is working properly to show the station, but the buttons on the center dash don't respond while the steering wheel controls for the radio work, try checking the face plate. Behind the face plate, there is a separate power plug that connects to it independently from the radio unit. This plug can be found on the passenger side directly behind the face plate.
You should make sure to have the anti-theft system checked as well.
How can I reach the individual power connector that is separate from the radio unit itself? This connector is located on the passenger side, directly behind the faceplate. How do I remove the faceplate to access it?
If the radio buttons in your car are not functioning properly, it is likely due to a blown fuse. Refer to your vehicle's manual to locate and replace the fuse.