Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
Which oil filter is compatible with the 2009 Ford Focus model?
1037 views
5 answers
★ Top Answer
The specific oil filter to use for a 2009 Ford Focus is the fRam extra guard oil filter with the part number ph4967. When changing the oil in the car, ensure that the vehicle has been parked and turned off for a few hours to avoid getting burned by the hot oil. Locate the oil pan and drain plug underneath the engine compartment. Place a bucket beneath the plug and remove it to allow the oil to drain into the pan. Let the oil drain completely, which may take about an hour. Once it stops dripping, replace the drain plug. Find the oil intake port on top of the oil pan and use a funnel to fill it with oil, being careful not to overfill. It's okay to slightly underfill, but overfilling can cause leaks and oil burn off. When the oil pan is filled, close the port, clean up any spilled oil, and the oil change is complete.
More answers
-
You can install a Fram oil filter on your 2009 Ford Focus.
-
The 2009 Ford Focus requires 5w-20 oil for optimal performance.
-
The answer provided is incorrect! The Fram extra guard filter needed for the 2009 Focus is actually the ph3614 model.
-
You should consider replacing the oil filter every 3,000 to 6,000 miles, which is usually done during an oil change.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
