Vehicle Questions and Answers
Welcome to the Vehicle Q&A Hub. Find answers to your automotive questions, share your experiences, and get expert advice on vehicle maintenance, troubleshooting, and more!
Why isn't the cluster on my 2010 Chevy Malibu functioning properly?
6836 views
6 answers
★ Top Answer
In a 2010 Chevy Malibu, the main reason the instrument cluster might stop working is usually due to a blown fuse. This car has three fuse boxes located in different areas - the engine compartment, passenger compartment, and cargo area. The specific fuse box to check for this issue is in the cargo area, which you can reach by opening a panel in the trunk on the driver's side. If a blown fuse is not the culprit, it is advisable to inspect the interior lights connections, as there could be a minor wiring problem that needs attention. In rarer cases, the entire instrument cluster may require replacement, which can be a pricey fix costing around $920 to $960, with labor typically ranging between $70 to $100.
More answers
-
The issue was with the positive battery terminal being loose. Once the terminal was tightened, the problem was resolved.
-
Some typical causes for the dashboard display not functioning in a 2010 Chevy Malibu could include a blown fuse, faulty wiring, or a malfunctioning instrument cluster.
-
My group of electronic components is not functioning properly. I have checked all the fuses and battery cables, and they appear to be in good condition. I also attempted to replace the bcm, but that did not solve the issue. If you have any advice or suggestions, please let me know.
-
Cluster not functioning properly
-
So, I looked at the fuses inside my car and in the trunk and they were all okay. Then, I only had to inspect the fusebox under the hood. That's when I saw that one of the terminals on my battery was a bit loose. I tightened it up and everything started working fine without any more issues.
Buying a Used car?
Check it by Epicvin
Check it by Epicvin
