1994 BUICK ROADMASTER Recall Check

Recall #:

96V019000

Recall Date:

1996-02-01

Component(s):

SUSPENSION: FRONT: CONTROL ARM: LOWER BALL JOINT

DEFECTIVE LOWER CONTROL ARM BALL JOINT ATTACHMENT NUTS WERE NOT PROPERLY TORQUED AND CAN LOOSEN.

Recall #:

94V210000

Recall Date:

1994-11-02

Component(s):

FUEL SYSTEM, GASOLINE: STORAGE: TANK ASSEMBLY: MOUNTING

THE FUEL TANK ATTACHMENT STRAP FASTENERS WERE NOT PROPERLY TIGHTENED. THE FASTENERS CAN COMPLETELY DETACH, EVENTUALLY ALLOWING THE FUEL TANK TO SAG AND THE BOTTOM OF THE TANK TO STRIKE THE ROADWAY.

Recall #:

95V082000

Recall Date:

1995-05-01

Component(s):

VEHICLE SPEED CONTROL: SPRINGS

THESE VEHICLES FAIL TO CONFORM TO FMVSS NO. 124, "ACCELERATOR CONTROL SYSTEMS." AT LOW TEMPERATURES, EXCESSIVE FRICTION CAN OCCUR IN THE ACCELERATOR PEDAL ASSEMBLY.

Recall #:

94V049000

Recall Date:

1994-03-31

Component(s):

ENGINE AND ENGINE COOLING: COOLING SYSTEM: HOSES/LINES/PIPING/FITTINGS

THE ENGINE OIL COOLER INLET HOSE MAY HAVE BEEN INSTALLED TOO CLOSE TO THE STEERING GEAR CAUSING CHAFING. THE CHAFING CAN EVENTUALLY WEAR THROUGH THE HOSE'S PROTECTIVE SLEEVE RESULTING IN ENGINE OIL LEAKING ONTO THE ENGINE.

Recall #:

94V076000

Recall Date:

1994-05-03

Component(s):

WHEELS: LUGS/NUTS/BOLTS/STUDS

PAINT ON THE WHEEL MOUNTING SURFACES CAN ACT AS A SHIM BETWEEN THE WHEEL AND THE ROTOR/DRUM. AS THE VEHICLE IS DRIVEN, THE WHEEL IMBEDS INTO THE PAINT, LOOSENING THE LUG NUT AND CAUSING A LOSS OF CLAMP LOAD.