8 Habits to Maintain the Value of Your Car
In this article, you will learn what steps you can take to maintain the value...
Read moreLooking for the VIN?
Here is there you’ll find it:
VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE.
CERTAIN TIGAS FUEL PUMP MODULES MANUFACTURED BETWEEN JUNE 1 AND SEPTEMBER 24, 2006, SOLD UNDER VARIOUS BRAND NAMES AND P/NOS. THESE FUEL PUMP MODULES ARE SOLD AS AFTERMARKET FOR USE IN CERTAIN DAIMLERCHRYSLER VEHICLES LISTED ABOVE. SILICONE MATERIAL USED IN MANUFACTURE OF THE FLAPPER VALVE WAS OUT-OF-SPECIFICATION, LEADING TO EXCESS SWELL OF THE FLAPPER VALVE RESTRICTING THE FLOW OF FUEL TO THE FUEL PUMP MODULE.
CERTAIN TRADESONIC COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
IMPORT PRODUCTS IS RECALLING 30,351 FUEL FILTERS SOLD TO AND BRANDED BY THE AFFINIA GROUP AS CARQUEST P/N 86523, NAPA P/N 3523, AND WIX P/N 33523 FOR USE AS REPLACEMENT EQUIPMENT ON THE VEHICLES LISTED ABOVE. THESE FILTERS MAY DEVELOP A LEAK IN THE HOSE ASSEMBLY AND/OR CONNECTORS DUE TO IMPROPERLY ADHERED LINE CONNECTORS.
SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY.
Title | Year 1 | Year 2 | Year 3 | Year 4 | Year 5 | Total for 5 years |
---|---|---|---|---|---|---|
Depreciation |
Year 1 $512 |
Year 2 $472 |
Year 3 $433 |
Year 4 $394 |
Year 5 $354 |
Total for 5 years: $2,165 |
Insurance |
Year 1 $1,451 |
Year 2 $1,502 |
Year 3 $1,554 |
Year 4 $1,609 |
Year 5 $1,665 |
Total for 5 years: $7,781 |
Fuel |
Year 1 $1,696 |
Year 2 $1,747 |
Year 3 $1,808 |
Year 4 $1,880 |
Year 5 $1,965 |
Total for 5 years: $9,096 |
Maintenance |
Year 1 $2,763 |
Year 2 $2,185 |
Year 3 $953 |
Year 4 $491 |
Year 5 $2,291 |
Total for 5 years: $8,683 |
Repair |
Year 1 $1,749 |
Year 2 $1,290 |
Year 3 $1,473 |
Year 4 $1,590 |
Year 5 $1,816 |
Total for 5 years: $7,918 |
Taxes & Fees |
Year 1 $258 |
Year 2 $29 |
Year 3 $38 |
Year 4 $24 |
Year 5 $33 |
Total for 5 years: $382 |
Total for 5 years: $36,024
Discover expert tips, news and advice on buying and maintaining used vehicles
In this article, you will learn what steps you can take to maintain the value...
Read moreOur team will tell you about sensors for cars.
Read moreCheck our guide that features the best Mercedes SUV models.
Read more